Taps

Machine G tubular spiral tap for NC / CNC machines (high speed) in S-NC helix Standard: DIN 5156 Thread lead: E, 1.5 to 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Ground thread profile Coating: TiCN - Titanium Carbon Nitride Helix angle: 45 ° Usage: 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / mm2 3.3 : Ball and malleable cast iron up to 700N / mm2 3.4 : Ball and malleable cast iron up to 1000N / mm2 1.1: Magnetic and mild structural steel up to 400M / mm2 1.2: Structural and free-cutting steel up to 500N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloys with long chips up to 800N / mm2 4.8: Aluminum and zinc alloys with long chips up to 800N / mm2 6.3: Brass with long chips up to 700N / mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N / mm2 7.3: Aluminum alloys with silicon content from 5% to 10%, up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Thread Repair Thread: M 12x1,75 Gradient: 1,75 Hexagon: 1/4 "(6,35mm) Dimensions according to enclosed photos For threaded inserts according to ISO 2 (6H) The pitch and size of this tap is NOT M12x1,75 !!! Thread made by this tap has ISO1 tolerance (4H) Suitable for drilling machine

Left-hand BSP machine tap, straight groove, for pipe thread Thread type: English pipe inch whitworth thread - British Standard Pipe thread Dimension: according to the selected variant Peak angle: 55° Form: C Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN 5156, DIN ISO 228 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through and blind holes

Machine Thread Repair Tap: UNF 5/16 " Gradient: 24 Strokes per inch Form: D Material: HSS (High-Speed ??Steel) Dimensions according to enclosed photos. For threaded inserts according to tolerance 3B UNC 5 / 16x24 !!! Thread cut with this tap has tolerance 2B UNC and UNF taps below diameter 1 / 4 "are numbered 0 to 12 UNF - Unified US inch thread, fine pitch, top angle is 60 ° (same as metric)

Hand-held disposable nut tap Size and incline: according to the selected variant Fitting: ISO2 Material: HSS - High speed steel Standard: DIN357 Dimensions: - see attached catalog sheet

Right machine tap, straight slot with chip breaker, for metric thread - with hexagon for cordless drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : B Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes

Right machine tap with spiral groove, for metric thread - with hexagon for battery drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : C Helix angle: 15° Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For blind holes

Machine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips

Hexagon nut with collar Thread: M20 Hexagon Hardness: 34HRC Standard: no norm, resp. in replacement for ČSN 243530.2 or DIN 6331 Production technology: Pressing Total Nut Nut: 26mm Hexagon: 32mm

Hand tap W 1 " Gradient: 8 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable thread threading or piece thread cutting.

Hand tap W 1/2 " HSS They are suitable for threading or thread cutting.

Hand tap W 1/8 " Gap: 40 turns per inch, basic Facing: Medium Material: NO - Tool steel - PN 8/3011 Hinges of NO They are suitable for threading or thread cutting.