Tapping head DIN69871 for TC type extensions with length compensation
M3-M12 / ISO40 DIN69871 |
In stock
(4x)
|
135,58 € with VAT |
M8-M20 / ISO40 DIN69871 |
In stock
(3x)
|
190,83 € with VAT |
M8-M20 / ISO50 DIN69871 |
In stock
(2x)
|
271,50 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Warranty:
- 24 months
Product information
Clamping range of the tap: according to the selected variant
Clamping shank (steep ISO cone): according to the selected variant
Standard: DIN69871
The torque coupling is set directly on the attachment.
Tap clamping method:
Taps are clamped in extensions, which need to be purchased separately.
The taps are secured in the extension with a square and a clamping shank.
The tap is held firmly in the extension, pulled out after pressing the clamping collar.
The extensions are secured in the head over a bearing and stones.
In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country.
Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards
Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately!
Usage:
The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.
Variants
Accessories
-
Insert for M5 tap with torque coupling, TC-312-M5-DIN371, 312-07D
DIN 371 (reinforced shank) : M5 and also M6 DIN 376 (classic shank): M8 Thread clamping method: Taps they are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock35,45 € with VAT -
Insert for M8 tap with torque coupling, TC-312-M8-DIN371, 312-09D
DIN 371 (reinforced shank) : M8 DIN 376 (classic shank): Length compensation - see enclosed photo Tapping method: Taps are in the attachments are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock35,45 € with VAT -
Insert for M6 tap with torque coupling, TC-312-M6-DIN371, 312-08D
DIN 371 (reinforced shank) : M6, and also M5 DIN 376 (classic shank): M8 Thread clamping method: Taps they are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock35,45 € with VAT -
Insert for M10 tap with torque coupling, TC-312-M10-DIN371, 312-10D
DIN 371 (Reinforced Shank) : M10 DIN 376 (classic shank): Length compensation - see enclosed photo Tapping method: Taps are in the attachments are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock35,45 € with VAT -
Insert for M12 tap with torque coupling, TC-312-M12-DIN376, 312-29D
DIN 374 (Standard Shank) M12 DIN 374 ( M12x1,5, M12x1,25, M12x1,0 DIN 371 (Reinforced stopwatch): --- Length compensation - see enclosed photo Way Tapping: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
On request34,29 € with VAT -
Insert for M14 tap with torque coupling, TC-312-M14-DIN376, 312-30D
DIN 374 (Classic Shank): M14 DIN 374 ( M14x1,5, M14x1,25, M14x1,0 DIN 371 (reinforced stopper): --- Length compensation - see enclosed photo Method Tapping: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock34,29 € with VAT -
Insert for M10 tap with torque coupling, TC-312-M10-DIN376, 312-28D
DIN 371 (Standard Shank) M10 DIN 371 ( reinforced stopwatch): --- Length compensation - see enclosed photo Tape clamping method: The taps are secured in the extension behind a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock34,29 € with VAT -
Insert for M8 tap with torque coupling, TC-312-M8-DIN376, 312-27D
DIN 371 (Standard Shank): M8 DIN 371 ( M5 and M6 Length compensation - see enclosed photo Tape clamping method: The taps are secured in the extension with a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock34,29 € with VAT -
Insert for M6 tap with torque coupling, TC-312-M6-DIN376, 312-25D
DIN 371 (Standard Shank): M6 DIN 371 ( reinforced stopper): M4 Length compensation - see enclosed photo Tape clamping method: The taps are secured in the attachment behind the square and the clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock34,29 € with VAT -
Insert for M3 tap with torque coupling, TC-312-M3-DIN371, 312-03D
DIN 371 (Reinforced Shank) : M3 DIN 376 (classic shank): M4,5 and M5 Taps: Taps they are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock35,45 € with VAT -
Insert for M4 tap with torque coupling, TC-312-M4-DIN371, 312-05D
DIN 371 (reinforced shank) : M4 DIN 376 (classic shank): M6 Length compensation - see enclosed photo Tapping method: Taps are secured in the extension behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock35,45 € with VAT -
Insert for M5 tap with torque coupling, TC-312-M5-DIN376, 312-24D
Quick Release Clamp / Case / Insert / TC312 Clamp for M5 Machine Taps Clamp Clamp Attachment: DIN 376 (Classic Shank): M4,5 and M5 DIN 371 (reinforced stopper): M3 Length compensation - see enclosed photo Tapping method: The taps are secured in the extension with a square and clamp stopwatch. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock34,29 € with VAT -
Insert for M2 tap with torque coupling, TC-312-M2-DIN371, 312-02D
DIN 371 (Reinforced Shank) : M2 and M2,5 DIN 376 (classic shank): M4 Thread clamping method: Taps they are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
On request35,45 € with VAT -
Insert for M4 tap with torque coupling, TC-312-M4-DIN376, 312-22D
DIN 371 (Standard Shank): M4 DIN 371 ( M2 and M2,5 Length compensation - see enclosed photo Taper clamping method: The taps are secured in the adapter by a square and clamp stopwatch. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock34,29 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!