Straight groove with a chip breaker
-
Machine tap M - HSSE ISO2(6H) with chip breaker, FANAR
Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 8,80 € with VAT -
Machine tap M - HSSE TiN ISO2(6H) with chip breaker 800X, FANAR
Machine tap with straight groove and chip breaker 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food stainless steel Cast iron Non-ferrous metals
from 10,77 € with VAT -
Machine tap M - HSSE TiN ISO3 (6G) with chip breaker 800X , FANAR
Machine tap with straight groove and chip breaker 800X Fitting: ISO3 (6G) - plus tolerance for threads, where surface treatment (galvanization, etc.) will be applied Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals
Price - On request -
Machine tap M - HSSE-PM TiAlSiN ISO2(6H) with chip breaker, FANAR
Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics
from 12,81 € with VAT -
Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR
Machine tap with straight groove and chip breaker, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 17,40 € with VAT -
Machine tap M - HSSE-PM TS 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR
Machine tap with straight groove and chip breaker, made of sintered steel, type PM TS Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 13,90 € with VAT -
Machine tap M - left HSSE TiN ISO2 with chip breaker 800X, FANAR
Left hand machine tap with straight groove and chip breaker 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals
from 13,18 € with VAT -
Machine tap M - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR
Machine tap with spiral groove 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 * Food grade stainless steel (does not increase the thread, maintains the prescribed tolerance)
from 11,17 € with VAT -
Machine tap with chip breaker, final sale
Clearance saleMachine tap (high speed) with chip breaker Straight groove, ground thread profile Diameter and incline: according to the selected variant Fitting and form: according to the chosen variant Standard: CSN 223043 Material: according to the selected variant
from 3,82 € with VAT -
Machine tap M - HSSE ISO3(6G) with chip breaker, FANAR
Machine tap with straight groove and chip breaker Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 9,18 € with VAT -
Machine tap M - HSSE GAL ISO2 (6H) with chip breaker, FANAR
Machine tap (high speed) with chip breaker, straight slot Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371, DIN 376 Thread lead: B, 4 courses - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: 7.1: Aluminum and aluminum alloys 1.1: Mild, ductile and magnetic steels with strength up to 400N / mm2 6.1: Copper and copper alloys
from 9,81 € with VAT -
Machine tap M - HSSE AL ISO2(6H) with chip breaker, FANAR
Machine tap (high speed) with chip breaker, straight slot Fitting: ISO2 / 6H - ground thread profile Thread lead: B, 4 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: 7.1: Aluminum 1.1: Mild, ductile and magnetic steels with strength up to 400N / mm2 6.1: Copper and copper alloys
from 10,33 € with VAT
