Step drill 18.0 / 10.5 HSS for M10 screw with taper shank ČSN 221253, StimZet
Variant:
| 5,3 x 10,0 mm |
On request
|
49,90 € with VAT |
| 6,4 x 11,0 mm |
On request
|
53,02 € with VAT |
| 8,4 x 15,0 mm |
On request
|
74,42 € with VAT |
| 10,5 x 18,0 mm |
On request
|
94,53 € with VAT |
| 13,0 x 20,0 mm |
On request
|
104,83 € with VAT |
| 15,0 x 24,0 mm |
On request
|
131,13 € with VAT |
| 17,0 x 26,0 mm |
On request
|
135,59 € with VAT |
| 19,0 x 30,0 mm |
On request
|
181,52 € with VAT |
Current price:
94,53 €
with VAT
78,12 € without VAT
On request
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000212600
- Brand:
- StimZet
- Warranty:
- 24 months
- Code:
- K531801V000S
Product information
Czech metal step drill 18x10,5 mm for M10 bolt
Step drill bit for shaft and hex bolt head 180 °
Overall length: 228mm
Helix length total / front part : 130 / 23mm
Morse cone: MK2
Helix angle: 25 ° to 30 °
Angle of the tip: 118 ° and 180 °
Form: A
Material: HSS
Standard: K531801V000S
Drill is cut to two diameters: 10.5mm and 18.0mm
Drilling requires lower cutting conditions than standard normatives for conventional drills.
Usage:
Stepped drills with four facets are recommended for drilling screw holes and at the same time recesses for cylindrical screw heads in non-alloy and alloy steel and steel castings to a strength of 800 N / mm2, gray, tempered ductile cast iron, aluminum alloys, etc.
Cat. No .: K531001V000S
If you need a different size, see the enclosed photographs - see the DIN8377 catalog sheet - for German screws.
Step drill bit for shaft and hex bolt head 180 °
Overall length: 228mm
Helix length total / front part : 130 / 23mm
Morse cone: MK2
Helix angle: 25 ° to 30 °
Angle of the tip: 118 ° and 180 °
Form: A
Material: HSS
Standard: K531801V000S
Drill is cut to two diameters: 10.5mm and 18.0mm
Drilling requires lower cutting conditions than standard normatives for conventional drills.
Usage:
Stepped drills with four facets are recommended for drilling screw holes and at the same time recesses for cylindrical screw heads in non-alloy and alloy steel and steel castings to a strength of 800 N / mm2, gray, tempered ductile cast iron, aluminum alloys, etc.
Cat. No .: K531001V000S
If you need a different size, see the enclosed photographs - see the DIN8377 catalog sheet - for German screws.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!