Spiral - screw groove

Machine spiral M14x1 Size: M14x1,0 Gradient: 1,0, Fine Facing: ISO1 / 4H - Cut Thread DIN 374 C < br> Thread start: C, 2 steps - see attached photo Material: HSS (High-speed steel) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 20x2,5 Size: M20x2,5 Gradient: 2,5, basic Facing: ISO1 / 4H - Cutting thread profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSS (High-speed steel ) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 22x2,5 Size: M22x2,5 Gradient: 2,5, basic Facing: ISO1 / 4H - Threaded profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSS (High-Speed ??Steel) Coating: uncoated Helix angle: 15 °

Machine spiral tap M 22x2,5 Size: M22x2,5 Gradient: 2,5, basic Facing: ISO1 / 4H - Threaded profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSSE (High-speed steel 5% Co) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 24x3,0 Size: M24x3,0 Gradient: 3,0, basic Facing: ISO1 / 4H - Cut thread profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSS (High-speed steel) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 24x1 Size: M24x1,0 Gradient: 1,0, Fine Face: ISO1 / 4H - Cut Thread DIN 374 C < br> Thread start: C, 2 steps - see attached photo Material: HSS - High-speed steel Coating: uncoated Helix angle: 40 °

Calibr. - Calibration Limit Ring with Exact Size 49.9990mm DIN 2250

Caliber - Limit Calibration Ring, Accurate Size 59.9995mm DIN 2250

Varnishing spray gun with plastic top container. 3.5 - 4.8 bar. Contains a 1.4mm nozzle. Container contents 600ml 1/4 "G 1/4" accessories -

Metal tool box with seven drawers, castors Height of case (without castors) 85cm, width 68cm, depth 46cm Handle can be placed from the right or left side Seven drawers. Five Drawer Widths: Width 57cm, Height 6cm, Depth 40cm Larger Drawers Dimensions: Width 57cm, Height 14cm, Depth 40cm Maximum Drawer Drawers: 40cm In each drawer and top swap the part is an anti-slip pad

Set of machine taps with spiral groove / set of spiral taps HSSE OX The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: OX - Oxidation Number of lead teeth: C (2-3 teeth) Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. no.: Z2-085015-0000

Set of machine taps with spiral groove / set of spiral taps HSSE 800X Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 up to) Tolerance: ISO2 / 6H Coating: TiN - Titanium Nitride Number of lead teeth: C(2-3 teeth) Application - blind hole: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold-drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 - Food grade stainless steel(does not increase thread, holds prescribed tolerance) Cat. No: Z2-513X15-0310