Special measuring tools

ISH-SPHA Portable Digital Hardness Tester Type: Digital Scales: Leeb(HL), Vickers(HV), Brinell(HB), Rockwell(HRC HRB)) , Shore(HS) and measurement of strength(tensile length) in MPa Resolution: 1HL, 1HV, 1HB, 0,1HRC, 0,1HRB, HS, 1MPa Accuracy: -6HL(at HL = 800) Data output: bluetooth and USB Power supply: built-in rechargeable battery Accessories: 1x display unit 1x Touch - type D 1x printer 1x Test block - type D 1x Support ring 1x cleaning brush 1x Power cable 1x USB cable and photware 1x stylus for touch screen Possibility of transfer to PC wirelessly â € oOr via USB. Dimensions(W x D x H): 83 x 24 x 135 mm Hardness tester weight: 350g For hardness tester you can buy: Touch type DC: ISH-SPHA-DC Touch type C: ISH-SPHA-C Touch type D 15: ISH-SPHA-D15 Touch type DL: ISH-SPHA -DL < br> Touch type G: ISH-SPHA-G Test block type D: ISH-BHLD Test block type G: ISH-BHLG Connecting cable: ISH-COUPLANT Support rings

Checking spindle for spindle control, morse cone MK 2 Measuring part diameter: 24mm Length of measuring part: 180mm Accuracy: 0,003 mm ČSN 251926

Suitable for measuring the distance between two points, volume and area. Suitable for indoor use only, the rangefinder does not have IP protection. Ideal for DIY, construction, flooring, etc. It is possible to store 99 measurement results, backlit display. Accuracy: / - 2mm Laser type: 635nm Class II Dimensions: 118x54x26,5mm Batteries: 2x AAA 1,5V

Analogue tester / shore meter / hardness soft rubber / rubber soft foam, soft foam elastomers, polystyrene and urethane foams, textile windings, pottery, shoes etc. Hardness measurement range: 20 - 100 Shore C Resistance: 1 Shore Type C: Hardened touch of diameter 5mm, with extended support base 30mm diameter Ball design - suitable where you do not want to leave a trace of measurement.

Hardness Measurement Range: 20 - 100 Shore D Power (Resistance Used to Measure): 44.64 N Dimensions: 110x38x50mm Accuracy: 1 Shore Type D: Hardened touch 1.1 to 1.4mm in diameter, 30 ° tip to tip with radius 0.1mm

Universal hardness tester HRBV 187,5 - Brinell, Rockwell, Vickers, also usable for measuring of thin sheets Type: Analog Range: 4-450HBS, 4-650HBW, 20-88HRA, 20- 100HRB, 20-70HRC, 200-1000HV Resolution: 0.5HR Max. test item height: 200mm Max. diameter of test item: 160mm Test load: 30kg / 31,25kg / 60kg / 62,5kg / 100kg / 150kg / 187,5kg Testing force: 294,2N, 306,5N, 588,4N , 612,9N, 980,7N, 1471,18N Accessories: 1x test tower dia. 62mm 1x test bench 150mm 1x prism 1x touch - diamond cone 120 ° 1x touch - diamond needle 136 ° 2x touch - steel ball 1,588mm 2x touch - steel ball 2,5mm 2x touch - steel ball 5,0mm 1x microscopic magnifying glass JC5 (2x / 40x) 1x set of standards HBS 150-250, HRA 80 - 88, HRB 85 - 95, HRC 60-70, HRC 35-55, HRC 20-30, HV 400-500 Power supply: 220V, 50Hz Dimensions (W x H x D): 200 x 465 x 760 mm Weight: 105kg with wrapper / 90kg without packaging

Universal Analog Hardness Tester HR150A - Rockwell Analog Type: Analog Range: 20-88HRA, 20-100HRB, 20-70HRC Resolution: 0.5HR Max . test item height: 170mm Max. Average test item: 135mm Test load: 60kg / 100kg / 150kg (initial load 10kg) Testing force: 588,4N, 980,7N, 1471N 1 test bench 62mm HRA 80 - 95, HRC 60 - 70, HRC 35 - 55, HRA 20 - 30. Dimensions (W x H x D): 180 x 465 x 630 mm Weight: 90kg with packaging / 60kg without packaging

Ball tip - ball for hardness tester HR-150A Clamping diameter: 6,35mm(1/4 ") with screw tightening surface Dmax: 10mm(8mm) Length clamping shanks: 11mm Overall length: 25mm

All-metal triangular sliding gauge for measuring three-pronged tools, especially milling cutters Scale is in inches and millimeters, resolution 0.05mm or 1/1000 inch Measuring range: 5-40 mm Material: stainless steel

All-metal sliding gauge, five-sided, designed for measuring five-sided tools, especially milling cutters Scale is in inches and millimeters, resolution 0.05mm or 1/1000 inch Measurement range: 2-40 mm Material: Stainless