Soft split jaw SD 200/3 for self-centering universal chuck KUS, Metal tools

Dimensions & Parameters - See enclosed PDF Accuracy, runout - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.

Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 200 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, runout - see attached PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.

Three-Turn Turning Chuck / Universal with Outer Sets OJS and Internal IJS Jaws and Loop, with Short Cone Type D - Camlock Pins - ČSN 243830 Diameter: 200 mm Clamping: D5 Camlock Other dimensions and parameters - see enclosed PDF Accuracy, run-in - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a wooden toy with Czech instructions. Suitable for eg lathes with camlock DIN ISO 702-2, eg OPTIturn TH 3610, OPTIturn TH 4010 and others

HardLine Series has locally grooved guide grooves for pinion mounting Diameter: 200 mm > Clamping: M1 Other Dimensions and Parameters - See Attached PDF Accuracy, Angling - See Attached PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.