Soft split jaw SD 160/3 for self-centering universal chuck KUS, Metal tools

HardLine Series has locally grooved guide grooves for mounting pinions Diameter: 160 mm > Clamping: M1 Other Dimensions and Parameters - See Attached PDF Accuracy, Angling - See Attached PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.

Three-Turn Turning Chuck / Universal with Outer Socket Set OJS and Internal IJS Jaws and Clamp, with Short Tip D Type - Camlock Pins - ČSN 243830 Diameter: 160 mm Clamping: D5 Camlock Other dimensions and parameters - see enclosed PDF Accuracy, run-in - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions. Suitable for eg lathes with camlock DIN ISO 702-2, eg OPTIturn TH 3610, OPTIturn TH 4010 and others

Three-Turn Turning Chuck / Universal with Set of Outer Sheaths and Internal IJS Jaws and Loop, with Short Cone Type D - Camlock Pins - ČSN 243830 Diameter: 160 mm Clamping: D4 Camlock Other dimensions and parameters - see enclosed PDF Accuracy, run-in - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions. Suitable for eg lathes with camlock DIN ISO 702-2, eg OPTIturn TU 3008, OPTIturn TH 3309 and others

Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 160 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, throwing - see attached PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.

Dimensions & Parameters - See enclosed PDF Precision, runout - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.