Smooth jaw (1pc) without mounting for VMC-160HV vise

Branded CNC machine vice with improved hydraulic transmission Jaw width: 160mm Jaw height: 58mm Opening: 240mm Vibrating length: 625mm Vise Height: 168mm Maximum Hydraulic Pressure: 48 kN (5000kgf) The tightening scale (3 degrees) is on the power shaft. Hydraulic gear can be switched off and tightened manually without it. Just untie the nut - see attached photo. In contrast to the VNC VNC series, VMC has a higher stiffness, covered top and crank - prevents splinters from getting inside. Guarantee of the height of the vice. The mechanism stretches when tightening the jaw down. Screw is encapsulated -> dust, splinters and dirt protection. Body made of high-quality and highly resistant cast iron FCD60 Machining surface for workpiece hardened> 45 HRC. Parallelism of the bearing surface and the bottom of the vice: 0,01 mm / 100mm Rectangular contact area with jaw: 0,02 mm / 100mm Parallel with workpiece parallelepiped: 0,02 mm / 100mm < br> Hydraulic oil

Branded CNC machine vice with improved hydraulic transmission Jaw width: 160mm Jaw height: 58mm Size: 350mm Vise length: 740mm Vise height: 168mm Maximum hydraulic pressure: 48 kN( 5000kgf) There is a tightening scale(3 degrees) on the shaft at the booster. The hydraulic transmission can be switched off and tightened by hand without it. Just disconnect the nut - see the attached photo. Compared to a number of VNC vices, the VMC type has a higher rigidity, covered by a bed from above and from the handle - it prevents chips from getting inside. Vise height guarantee. The mechanism pulls while tightening the jaw down. The screw is encapsulated -> protection against dust, chips and dirt. Body made of high-quality and highly resistant ductile iron FCD60 Bearing surface hardened> 45 HRC. Parallelism of the bearing surface and the bottom of the vice: 0.01 mm / 100 mm Perpendicularity of the bearing surface with the jaws: 0.02 mm / 100 mm Parallelism of the bearing surface with workpiece : 0.02 mm / 100mm Hydraulic oil