Slotting groove holder for inserts 8mm, UT-08-32L
| 2 x 25mm / D25 |
On request
|
218,30 € with VAT |
| 2 x 34,5mm / D25 |
In stock
(1x)
|
218,30 € with VAT |
| 2 x 25mm / D32 |
In stock
(1x)
|
218,30 € with VAT |
| 2 x 34,5mm / D32 |
On request
|
218,30 € with VAT |
| 3 x 30mm / D25 |
On request
|
218,30 € with VAT |
| 3 x 40mm / D25 |
In stock
(2x)
|
218,30 € with VAT |
| 3 x 30mm / D32 |
On request
|
218,30 € with VAT |
| 3 x 40mm / D32 |
On request
|
218,30 € with VAT |
| 4 x 40mm / D25 |
On request
|
218,30 € with VAT |
| 4 x 56mm / D25 |
On request
|
218,30 € with VAT |
| 4 x 40mm / D32 |
On request
|
218,30 € with VAT |
| 4 x 56mm / D32 |
On request
|
218,30 € with VAT |
| 5 x 46mm / D25 |
On request
|
218,30 € with VAT |
| 5 x 66mm / D25 |
In stock
(1x)
|
218,30 € with VAT |
| 5 x 46mm / D32 |
In stock
(1x)
|
218,30 € with VAT |
| 5 x 66mm / D32 |
In stock
(2x)
|
223,57 € with VAT |
| 6 x 56mm / D25 |
On request
|
218,30 € with VAT |
| 6 x 81mm / D25 |
In stock
(2x)
|
218,30 € with VAT |
| 6 x 56mm / D32 |
In stock
(2x)
|
218,30 € with VAT |
| 6 x 81mm / D32 |
On request
|
220,90 € with VAT |
| 8 x 68mm / D25 |
In stock
(1x)
|
218,30 € with VAT |
| 8 x 100mm / D25 |
On request
|
218,30 € with VAT |
| 8 x 68mm / D32 |
In stock
(1x)
|
218,30 € with VAT |
| 8 x 100mm / D32 |
On request
|
218,30 € with VAT |
| 10 x 86mm / D25 |
On request
|
240,08 € with VAT |
| 10 x 126mm / D25 |
On request
|
240,08 € with VAT |
| 10 x 86mm / D32 |
In stock
(1x)
|
240,08 € with VAT |
| 10 x 126mm / D32 |
On request
|
240,08 € with VAT |
| 12 x 104mm / D25 |
On request
|
240,08 € with VAT |
| 12 x 161mm / D25 |
In stock
(1x)
|
240,08 € with VAT |
| 12 x 104mm / D32 |
On request
|
240,08 € with VAT |
| 12 x 161mm / D32 |
On request
|
240,08 € with VAT |
| 14-16 x 126mm / D25 |
In stock
(2x)
|
240,08 € with VAT |
| 14-16 x 180mm / D25 |
On request
|
240,08 € with VAT |
| 14-16 x 126mm / D32 |
In stock
(2x)
|
245,87 € with VAT |
| 14-16 x 180mm / D32 |
On request
|
240,08 € with VAT |
| 18-25 x 140mm / D32 |
In stock
(2x)
|
283,75 € with VAT |
| 18-25 x 200mm / D32 |
On request
|
283,75 € with VAT |
| 28 x 205mm / D32 |
On request
|
623,76 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000471304
- Brand:
- BRIGHETTI MECCANICA
- Warranty:
- 24 months
- Code:
- BM-UT-08-32L
Product information
For slot width / insert size: 8mm
Face diameter: 20mm
Minimum hole diameter: 21.5mm
Depth slotting: 100mm
Shank diameter: 32mm
Shank length: 100mm
Other dimensions - see enclosed catalog sheet.
The holder is made of heat treated hardened steel.
An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides.
We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet.
The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
Variants
Accessories
-
Grooving insert for slotting holder 8 P9, IN-08-P9
Slotting grooving insert for UT holders Insert width: 8mm Edge tolerance: P9(7,985mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock54,28 € with VAT -
Grooving insert for slotting holder 8 P9 with chamfer, IN-08-P9-SM
Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 8mm Edge tolerance: P9(7.985mm) Other dimensions - see enclosed data sheet Material: HSSE-PM( sintered cobalt steel) Coating: TiN Chamfering of the cutting edges helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface. The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.
On request54,28 € with VAT -
Grooving insert for slotting holder 8 H7, IN-08-H7
Slotting grooving insert for UT holders Insert width: 8mm Edge tolerance: H7(8,015mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock54,28 € with VAT -
Carbide slotting insert for slotting holder 8 D10, INHM-08-D10
Carbide shaping insert for UT- and UTSZ- holders Insert width: 8mm Edge tolerance: D10(8,098mm) Other dimensions - see enclosed catalog sheet Material: TK / SK / VHM - carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
On request56,63 € with VAT -
Carbide slotting insert for slotting holder 8 H7, INHM-08-H7
Carbide shaping insert for UT- and UTSZ- holders Insert width: 8mm Edge tolerance: H7(8,015mm) Other dimensions - see enclosed catalog sheet Material: TK / SK / VHM - carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
On request56,63 € with VAT -
Carbide slotting insert for slotting holder 8 C11, INHM-08-C11
Carbide shaping insert for UT- and UTSZ- holders Insert width: 8mm Edge tolerance: C11(8,170mm) Other dimensions - see enclosed catalog sheet Material: TK / SK / VHM - carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock56,63 € with VAT -
Grooving insert for slotting holder 8 H7 with chamfer, IN-08-H7-SM
Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 8mm Edge tolerance: H7(8,015mm) Other dimensions - see enclosed data sheet Material: HSSE-PM( sintered cobalt steel) Coating: TiN Chamfering of the cutting edges helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface. The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.
In stock54,28 € with VAT -
Grooving insert for slotting holder 8 D10, IN-08-D10
Slotting grooving insert for UT holders Insert width: 8mm Edge tolerance: D10(8,098mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
On request54,28 € with VAT -
Grooving insert for slotting holder 8 C11, IN-08-C11
Slotting grooving insert for UT holders Insert width: 8mm Edge tolerance: C11(8,170mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock54,28 € with VAT -
Eccentric case for broaching holders with 32mm shank, B-40
Eccentric housing with scale for slotting holders with up. shank: 32mm Case outer diameter: 40mm Case length: 95mm More information - see enclosed catalog sheet With the help of this sleeve it is possible to fine-tune the Y-axis for slotting machines holders, thus achieving a precise alignment of the knife edge axis with the workpiece axis. This is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the case( on the scale) by 0.5 mm on both sides.
In stock249,20 € with VAT -
Eccentric case for broaching holders with 32mm shank, B-50
Eccentric housing with scale for slotting holders with up. shank: 32mm Case outer diameter: 50mm Case length: 115mm More information - see enclosed catalog sheet With this case it is possible to fine-tune the Y-axis for slotting machines holders, thus achieving a precise alignment of the knife edge axis with the workpiece axis. This is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the case( on the scale) by 0.5 mm on both sides.
In stock273,31 € with VAT
Alternatives
-
Slotting groove holder for inserts 8mm, UT-08-25L
Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 100mm Shank diameter: 25mm Shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request218,30 € with VAT -
Slotting groove holder for 8mm inserts, UT-08-32
Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 68mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock218,30 € with VAT -
Slotting groove holder for inserts 8mm, UT-08-25
Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 68mm Clamping shank diameter: 25mm Clamping shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock218,30 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!