Slotting groove holder for 2mm inserts, UT-02-32
2 x 25mm / D25 |
On request
|
218,33 € with VAT |
2 x 34,5mm / D25 |
On request
|
218,33 € with VAT |
2 x 25mm / D32 |
In stock
(1x)
|
218,33 € with VAT |
2 x 34,5mm / D32 |
On request
|
218,33 € with VAT |
3 x 30mm / D25 |
On request
|
218,33 € with VAT |
3 x 40mm / D25 |
In stock
(1x)
|
218,33 € with VAT |
3 x 30mm / D32 |
On request
|
218,33 € with VAT |
3 x 40mm / D32 |
On request
|
218,33 € with VAT |
4 x 40mm / D25 |
On request
|
218,33 € with VAT |
4 x 56mm / D25 |
In stock
(1x)
|
218,33 € with VAT |
4 x 40mm / D32 |
On request
|
218,33 € with VAT |
4 x 56mm / D32 |
On request
|
218,33 € with VAT |
5 x 46mm / D25 |
On request
|
218,33 € with VAT |
5 x 66mm / D25 |
In stock
(1x)
|
218,33 € with VAT |
5 x 46mm / D32 |
In stock
(1x)
|
218,33 € with VAT |
5 x 66mm / D32 |
In stock
(2x)
|
223,62 € with VAT |
6 x 56mm / D25 |
On request
|
218,33 € with VAT |
6 x 81mm / D25 |
In stock
(2x)
|
218,33 € with VAT |
6 x 56mm / D32 |
On request
|
218,33 € with VAT |
6 x 81mm / D32 |
On request
|
220,95 € with VAT |
8 x 68mm / D25 |
In stock
(1x)
|
218,33 € with VAT |
8 x 100mm / D25 |
In stock
(1x)
|
218,33 € with VAT |
8 x 68mm / D32 |
On request
|
218,33 € with VAT |
8 x 100mm / D32 |
On request
|
218,33 € with VAT |
10 x 86mm / D25 |
On request
|
240,12 € with VAT |
10 x 126mm / D25 |
In stock
(1x)
|
240,12 € with VAT |
10 x 86mm / D32 |
In stock
(1x)
|
240,12 € with VAT |
10 x 126mm / D32 |
On request
|
240,12 € with VAT |
12 x 104mm / D25 |
On request
|
240,12 € with VAT |
12 x 161mm / D25 |
In stock
(1x)
|
240,12 € with VAT |
12 x 104mm / D32 |
On request
|
240,12 € with VAT |
12 x 161mm / D32 |
On request
|
240,12 € with VAT |
14-16 x 126mm / D25 |
In stock
(2x)
|
240,12 € with VAT |
14-16 x 180mm / D25 |
On request
|
240,12 € with VAT |
14-16 x 126mm / D32 |
In stock
(1x)
|
245,92 € with VAT |
14-16 x 180mm / D32 |
On request
|
240,12 € with VAT |
18-25 x 140mm / D32 |
In stock
(1x)
|
283,81 € with VAT |
18-25 x 200mm / D32 |
In stock
(1x)
|
283,81 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000471090
- Brand:
- BRIGHETTI MECCANICA
- Warranty:
- 24 months
- Code:
- BM-UT-02-32
Product information
For slotting width / insert size: 2mm
Face diameter: 6mm
Minimum hole diameter: 7mm
Cutting depth: 25mm
Clamping shank diameter: 32mm
Clamping shank length: 100mm
Other dimensions - see enclosed catalog sheet.
The holder is made of heat treated hardened steel.
An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides.
We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet.
The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
Variants
Accessories
-
Grooving insert for slotting holder 2 C11, IN-02-C11
Slotting grooving insert for UT holders Insert width: 2mm Edge tolerance: C11(2,120mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock45,24 € with VAT -
Grooving insert for slotting holder 2 D10, IN-02-D10
Slotting grooving insert for UT holders Insert width: 2mm Edge tolerance: D10(2,060mm) Other dimensions - see enclosed data sheet Material: HSSE -PM(sintered powder cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock45,24 € with VAT -
Grooving insert for slotting holder 2 H7 with chamfer, IN-02-H7-SM
Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 2mm Edge tolerance: H7(2,010mm) Other dimensions - see enclosed data sheet Material: HSSE-PM( sintered cobalt steel) Coating: TiN Chamfering of the cutting edges helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface. The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.
In stock45,24 € with VAT -
Grooving insert for slotting holder 2 H7, IN-02-H7
Slotting grooving insert for UT holders Insert width: 2mm Edge tolerance: H7(2,010mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock45,24 € with VAT -
Grooving insert for slotting holder 2 P9 with chamfer, IN-02-P9-SM
Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 2mm Edge tolerance: P9(1,994mm) Other dimensions - see enclosed data sheet Material: HSSE-PM( sintered cobalt steel) Coating: TiN Chamfering of the cutting edges helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface. The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.
In stock45,24 € with VAT -
Grooving insert for slotting holder 2 P9, IN-02-P9
Slotting grooving insert for UT holders Insert width: 2mm Edge tolerance: P9(1,994mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock45,24 € with VAT -
Eccentric case for broaching holders with 32mm shank, B-50
Eccentric housing with scale for slotting holders with up. shank: 32mm Case outer diameter: 50mm Case length: 115mm More information - see enclosed catalog sheet With this case it is possible to fine-tune the Y-axis for slotting machines holders, thus achieving a precise alignment of the knife edge axis with the workpiece axis. This is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the case( on the scale) by 0.5 mm on both sides.
In stock273,38 € with VAT -
Eccentric case for broaching holders with 32mm shank, B-40
Eccentric housing with scale for slotting holders with up. shank: 32mm Case outer diameter: 40mm Case length: 95mm More information - see enclosed catalog sheet With the help of this sleeve it is possible to fine-tune the Y-axis for slotting machines holders, thus achieving a precise alignment of the knife edge axis with the workpiece axis. This is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the case( on the scale) by 0.5 mm on both sides.
In stock249,26 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!