SK three-edged countersink 12.4mm 90° DIN 335 Blue-Tec, Karnasch
Variant:
Current price:
77,29 €
with VAT
63,88 € without VAT
In stock
(4x)
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 4046781083647
- Brand:
- Karnasch - Germany
- Warranty:
- 24 months
- Code:
- 20.1755.140
Product information
Carbide 3-blade cone countersink
Number run: 3
angle run: 90st
Maximum diameter: 12.4 mm
Minimum diameter: 2.8 mm
Clamping shank: 8mm
Total length: 56mm
Coating: BLUE-TEC, increases life of the countersink at cutting with very limited cooling(spray, paste), so i cutting dry dry
Material: carbide(pr. 4,3 to 11,5 all-hard design, 12,4-31mm carbide head with soldered shank made of tool steel)
Standard: DIN335 C
Application:
Hardening steel up to 50 HRC
Alloyed steel with tensile strength up to 1400N / mm2
Stainless steel with tensile strength up to 900N / mm2
Gray cast iron
Alloy aluminum with silicon content> 10%
, brass, plastics - Hardox, Hastelloy, Inconell, Nimonic and other special alloys
Properties:
Excellent drainage chip, run not chipped, resulting surface without scratches, great centering tools-holes
Grooves countersinks are cut fine diamond wheel, thanks what is to run sharper and smoother in comparison with common countersinks, where grooves are milled.
Run is always the highest The point diameter, ie the countersinking the material does not rub against the wall the recess, the se decreases necessary cutting force and decreases also generated heat -> which increases life of the countersink.
Number run: 3
angle run: 90st
Maximum diameter: 12.4 mm
Minimum diameter: 2.8 mm
Clamping shank: 8mm
Total length: 56mm
Coating: BLUE-TEC, increases life of the countersink at cutting with very limited cooling(spray, paste), so i cutting dry dry
Material: carbide(pr. 4,3 to 11,5 all-hard design, 12,4-31mm carbide head with soldered shank made of tool steel)
Standard: DIN335 C
Application:
Hardening steel up to 50 HRC
Alloyed steel with tensile strength up to 1400N / mm2
Stainless steel with tensile strength up to 900N / mm2
Gray cast iron
Alloy aluminum with silicon content> 10%
, brass, plastics - Hardox, Hastelloy, Inconell, Nimonic and other special alloys
Properties:
Excellent drainage chip, run not chipped, resulting surface without scratches, great centering tools-holes
Grooves countersinks are cut fine diamond wheel, thanks what is to run sharper and smoother in comparison with common countersinks, where grooves are milled.
Run is always the highest The point diameter, ie the countersinking the material does not rub against the wall the recess, the se decreases necessary cutting force and decreases also generated heat -> which increases life of the countersink.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!