SK cutter dia. 6.0 mm 4 pcs. for chamfering 90° TiAlN edges, AXON

Carbide Edge Cutter / Sintered Carbide Cutter Number of Cuts: 4pcs. Diameter of working part: 6mm, tolerance h6 Peak angle: 120 ° Minimal precipitation diameter: Dc: 1,2mm Overall length: 57mm Helix angle: 0 ° < Front Clamp Angle: 0 ° Clamping Shank: 6mm, tolerance h6 DIN 6535 HA Carbide: K30 F - ultra fine grain carbide, high hardness and durability against abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD (AlTiN) Application: Low alloy steel up to 600 MPa Alloyed steel up to 1200 MPa High alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Fine cast iron Refractory steels alloyed Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see enclosed photo Ref. No .: 36.600.120

Carbide Edge Cutter / Sintered Carbide Cutter Number of Cuts: 4pcs. Diameter of the working part: 6mm, tolerance h6 Peak angle: 60 ° Minimal precipitation diameter: Dc: 1,2mm Overall length: 57mm Helix angle: 0 ° < Front clamping angle: 0 ° Clamping shank: 6mm, tolerance h6 Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra fine grain carbide, high hardness and abrasion resistance, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD (AlTiN) Application: Low alloy steel up to 600 MPa Alloyed steel up to 1200 MPa High alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Fine cast iron Refractory steels alloyed Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see enclosed photo Ref. S350002.060012