Size 16

Vertical external exchangeable cutting insert 16 V ER A60 BMA / 16 V IL A60 BMA Size: 16 Climb: 0.5 - 1.5(The advantage of this plate is the possibility of cutting until the "end" thanks to the raised tip to the side) Insert height: 3.6mm The insert is inserted into vertical holders - the cutting edge can be seen on the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external replaceable edge thread insert 16 V ER AG60 BMA / 16 V IL AG60 BMA Size: 16 Pitch: 0.5 - 3.0( the advantage of this insert is the possibility of cutting "to the end" thanks to the offset tip to the side) Apical angle: 60° Insert height: 3.6 mm The insert is inserted into vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel Cutting conditions see attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Jointed Spout Nozzle 1/4 " Slot Size 25,4x1,27mm LI-NOX System

TN16NL080W Height (by Cut): 3,47mm Slices for Whitworth Cutting W W 8 Walks per inch Usage: Steel, Stainless & Cast Iron Non-original packaging

TN 16ER200M Metric Thread M 2,00mm Material: T8030 Usage: Steel: P25-P40 Stainless Steel: M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti): S15-S25 > Cat. No. 80017684

Removable Shaft Thread Insert TN 16ER175M Size: 16 Gradient: 1,75 mm Height (by Cut): 3,47mm Slices for Cutting Metric Thread, M 1,75mm Material: T8030 Usage: Steel: P25-P40 Stainless steel: M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti): S15-S25 > Cat. No. 80017689

Removable Thread Insert TN 16ER250M Cutting Metric Thread, M 2,50mm Material: T8030 Usage: Steel: P25-P40 Stainless steel: M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti): S15-S25 > Cat. No. 80017691

Removable Threaded Thread Insert TN 16ER050M Cutting Metric Thread, M 0,5mm Application: Steel: P25-P40 Stainless steel: M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti): S15-S25 > Cat. No. 80017692

Removable Shaft Thread Insert TN 16EL100M Size: 16 Gradient: 1,0 mm Height (by Cut): 3,47mm Slices for metric thread cutting, pitch M 1,0mm Material: T8030 Usage: Steel: P25-P40 Stainless steel: M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti): S15-S25 > Cat. No .: 80017714

Removable Shaft Thread TN 16EL110W BSW, BSF Inch Cutting Slices and G Thread with W 11 Paths per inch Material of Slicer: T8030 Application: Steel: P25-P40 Stainless Steel (Abrasion Resistant) : M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti) H25 Cat. No .: 80017739

Removable Shaft Thread Insert TN 16ER190W Size: 16 Creep: 19 Strokes per inch Height (By Cut): 3,47mm Inner Cutting Slices BSW, BSF and G Thread with 19 W Walks per inch Material of Slicer: T8030 Application: Steel: P25-P40 Stainless Steel (Abrasion Resistant) : M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti) H25 Cat. No .: 80017751

TN 16NR120W Height (by Cut): 3,61mm Cutting Slit Whitworth Thread: 12 Goes per inch > Use: Steel: P25-P40 Stainless Steel: M20-M35 Cast Iron: K20-K40 Non-ferrous Metals: N15-N30 Superslitz: S15-S25 -H25 80017767