Side riveting pliers M3-M6 for rivet nuts 200mm in a plastic case, KN 4770619

Profi side riveting pliers for riveting nuts / nut rivets in plastic case
Length: 200 mm
For nuts M3, M4, M5, M6
For nuts: aluminum, measured, steel and stainless steel < br> Including: riveting adapters 4pcs
Pliers are made of Cr-Mo material, carbon steel and PVC

Using a rivet nut in a knurled joint, you create an intact thread to which you can easily attach other components.

Procedure for riveting a nut into a sheet metal hole:
1) drill a suitable hole - the diameter and strength of the sheet metal is given on the bag with rivet nuts.
2) unfold the arms of the pliers and screw the thread onto the mandrel. nut(collar to pliers)
3) thread the nut on the mandrel into the hole, press vertically and press the arms of the pliers.
4) then open the arms and screw in the mandrel using the wheel, which you turn to the right.
5) Press the pliers arms repeatedly until the nut is firmly locked.
6) open the arms and turn the wheel to the left to unscrew the mandrel from the nut.

By shortening, lengthening the cylindrical part of the pliers it is possible to change the transmission / control force to a small extent.
When riveting the nuts, it is necessary to wait for the nuts with a feeling - there is a risk of the thread being torn out of the nut, or if the threaded part of the mandrel is torn off or if metal pliers mechanism .
General - even when riveting, it is necessary to keep in mind that the force mechanism of the pliers must not be overturned = this can happen in a moment when the matrix is ??â € ‹â €‹ already completely loaded = no longer riveted!
If you thread the nut in a place where it is not possible to check whether the nut is already completely tightened, or if you are starting and do not have a feeling yet, then We recommend that y