Shape A

Milling insert for hardened steel, replaceable insert, insert APGW 160408 HRC55 Suitable for holders for APKT 1604 or APMT 1604 inserts Radius: 0.8mm Material: CBN(1x) CBN coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

APMT 15T3 PDR - F56 WMG40 Cat. No. 0412827788

VBD APKT 1003 PDR - HM IC20 IC20 Series: Suitable for routine and finishing operations, roughing aluminum, cast iron and stainless steel. Plates are especially recommended for machining non-ferrous metals - aluminum, copper, brass, plastics, etc., or cutting / sharpening / casting to reduce the chip and the feed to a minimum. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Terms and conditions - see attached photo HM Type: General use Cat. : 5600047

Cutter insert, replaceable for VBD milling Dimensions according to enclosed catalog sheet Coating: PVD, TiAlN IC928 series: Tough sub-micron substrate with TiAlN PVD coating. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. Ideal for roughing operations and intermittent cuts. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Cat. No. 5602364

Milling insert, replaceable for milling VBD Dimensions according to enclosed catalog sheet Coating: PVD, TiAlN IC928 Series: Flammable sub-micron substrates with TiAlN PVD coating. Developed for machining heat-resistant alloys, austenitic stainless steels and very hard steels. Ideal for roughing operations and intermittent cutting. Steel: P20-P40 Stainless steel: M25-M35 Cast iron: K15-K40 Superalloys: S15-S30 Stainless steel conditions - see attached photo Cat. Ä. : 05602963 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

IC328 Series: Thin PVD Coated TiCN Layer on carbide P45-K40. Very high stiffness - resistance to embossing. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, under unstable engagement conditions (intermittent cut). Usage: Steel: P25-P50 Stainless Steel: M30-M40 Superslitz: S25-S30 Conditions - see attached photo Order no. No. 5604728

Indexable insert for VBD milling Dimensions according to enclosed catalog sheet Coating: PVD, AlTiN TiN IC830 Series: < Suitable for intermittent cut and roughing operations of stainless steels, refractory steels and alloyed steels. High stiffness and wear resistance. Usage - Universal: Steel: P20-P50 Stainless Steel: M20-M30 Superslitin: S15-S40 < Cat. No. 5606351

Cutter insert, replaceable for VBD milling Dimensions according to enclosed catalog sheet Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Application: Steel: P10-P30 Stainless Steel: M05-M20 Cast iron: K15-K30 Superslitz: S05-S20 Hardness: H05-H15 Terms and conditions - see enclosed photo Kat. No .: 5698901

Left VBD ADMT 160630 L - F56 WKP35, Changeable for Milling at Left Turning Speed ?? Radius: 3,0mm Coating: PVD, TiN Al2O3 TiCN Material: WKP35 Application: Steel: P25-P40 Cast iron: K25-K40 Cat. No. 05737917

VBD ADMT 160608 R - F56 WKP35S Interchangeable Milling Machine Radius: 0,8mm Coating: PVD, TiN Al2O3 TiCN Recycled Material: WKP35S Usage: Steel: P25-P40 Cast iron: K25-K40 Cat. No. 05995897

VBD insert ADMT120408R - F56 WSP45G, replaceable for milling Radius: 0.8mm Coating: PVD, TiN Al2O3 TiCN Insert material: WSP45G Usage: Steel : P30-P50 Stainless (abrasion-resistant) : M30-M50 Superalloys (Ni,Co,Fe,Ti) : S30- S50 Cat. no.: 0627608789 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD ADMT 160612 R - F56 WSP45S, Exchangeable for Milling Radius: 1,2mm Coating: PVD, TiN Al2O3 TiCN Material: WSP45S Application: Steel: P30-P50 Stainless Steel: M30-M50 S30- S50 Cat. No. 07078867