Sets of taps and eyes

Set of quality taps and eyelets of Czech production UNC 1, order no. 345100 UNC Thread Cutting Tool Set(UNC), referred to as UNC - American Inch Thread Coil Range: 1/4 "- 1/2"(ie dia. 6.35mm to 12.7mm), basic pitch Set contains: Taps and eyes: UNC 1 / 4x20 ", 5 / 16x18, 3 / 8x16, 7 / 16x14, 1 / 2x13(the number after the "x" always indicates the number of strokes per inch) Tap for taps: 2,5-7,1mm Shaft for threaded round jaws: 25 and 38mm Shaft housing: 25/20 and 38 / 30mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNC 2, order no. 345200 UNC Thread Set(UNified Thread Coarse), referred to as UNC - American Inch Unified Thread Range: 1/2 "- 1"(ie dia. 12.7mm to 25.4mm), basic ascent Set contains: Taps and eyes: UNC 1 / 2x13, 5 / 8x144, 3 / 4x10, 7 / 8x9, 1x8(number after "x" always indicates the number of strokes per inch) Shaft for taps: 5,6-16,0mm Shaft for Threaded round jaws: 55mm Bushing for beam: 55/38 and 55 / 45mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNF 0, order no. 346000 Set of tapping tools UNF(UNified thread Fine), marked UNF - American inch unified thread fine Range: size 5-44 to size 12-28(ie dia. 3,175mm to 5,486mm), gentle pitch Set includes: Taps and eyes: UNF 5-44 / 6-40 / 8-36 / 10-32 / 12-28(the second number always indicates the number of strokes per inch) Screw for taps: 2,5-7,1mm Shaft for threaded round jaws: 20mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNF 1, order no. 346100 Set of tapping tools UNF(UNified thread Fine), referred to as UNF - American inch unified thread fine Range: 1/4 "- 1/2"(ie dia. 6.35mm to 12.7mm), fine pitch Set includes: Taps and eyes: UNF 1 / 4x28 ", 5 / 16x24, 3 / 8x24, 7 / 16x20, 1 / 2x20(number after "x" always indicates the number of strokes per inch) Tap for taps: 2,5-7,1mm Shaft for threaded round jaws: 25 and 38mm Shaft housing: 25/20 and 38 / 30mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNF 2, order no. 346200 UNified thread fine tool set, designated UNF - American inch unified thread fine Range: 1/2 "- 1"(ie dia. 12,7mm to 25,4mm), fine pitch Set contains: Taps and eyes: UNF 1 / 2x20, 5 / 8x18, 3 / 4x16, 7 / 8x14, 1x12(number after " x "always indicates the number of strokes per inch) Shaft for taps: 5,6-16,0mm Threaded round jaws: 55mm Bushing for beam: 55/38 and 55 / 45mm Material: HSS - high speed steel

M2-II LH M12-M20 M12-M20, Left Contains Taps & Eyelets: M12, M14, M16, M18, M20 Contains taper and eyelet springs (including reducer) Material: HSS - high-speed steel

M3-M12 M3-M12 M3, M4, M5, M6, M8, M10 , M12 Taps for taps No. 2, clamping range (square) 2,5-7,1mm Eyelet: 25mm (others not needed, eyelets are the same diameter) Drill 2,5; 3.3; 4.2; 5; 6.8; 8.5; 10,2 Screwdriver Důlčík Threaded template Material: HSS - high-speed steel

M3-MS M3-M12 M3, M4, M5, M6, M8 , M10, M12 Taps and loops: M8x1,0, M10x1,0, M12x1,0, M12x1,5 Torque tongue DIN 1814 Eyelet: 25mm diameter) Material: HSS - high-speed steel

M3-M12 M3-M12 M3, M4, M5, M6, M8 , M10, M12 HSSE -

Set of circular jaws of Czech production MINI-1 Set of die-cut tools Range: M3-M12 Set contains: Circular jaws: M3, M4, M5, M6, M8, M10, M12 Eyelet: 25mm and 38mm, inserts 38/30 and 25/20 Material: HSSE VA - high-speed steel (HSS Co5), suitable for stainless steel

Set of machine taps with HSSE three-piece breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: uncoated Numerical of running teeth: B(4-5 teeth) Use - through hole: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 < br> Cat.no.:47815

Set of machine taps with spiral groove / set of HSSE spiral taps Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) < br> M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: without coating Number of tapping teeth: C(2-3 teeth) Use - blind hole: 1.3: Structural and carbon steel, low alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 Cat.