Set of rotor blades(7pcs) for GP-21J, GISON
Product information
Length: 45mm
Height: 13,7mm
Thickness: 3,0mm
The blades are part of the drive mechanism of the pneumatic tool. The slats wear out normally over time, or if the drive mechanism is not sufficiently lubricated with air without impurities, their faster abrasion occurs. (using a dry tool without an eraser) and needs to be replaced. This is a consumable item.
The product contains
Accessories
-
Velocite 6 oil for pneumatic tools - 100ml, Mobil
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock2,11 € with VAT -
Velocite 6 oil for pneumatic tools - 200ml, Mobil
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock3,38 € with VAT -
Velocite 6 oil for pneumatic tools - 50ml, Mobil
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock1,29 € with VAT -
Grinding wheel dia. 76mm QRC 411 Z80, KLINGSPOR
Exchangeable Speed ??Disc Disc with Quick Change Disc - QRC411 Diameter: 76mm Type of Clamping: QRC Grain: 80 Application: Aggressive Sanding of Standard and Stainless Steel thanks to the self-sharpening zircon corundum. High abrasion. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.
On request1,28 € with VAT -
Grinding wheel dia. 76mm QRC 411 Z60, KLINGSPOR
Changeable Speed ??Disc Disc with Quick Change Disc - QRC411 Diameter: 76mm Clamp Type: QRC Grain Size: 60 Usage: Aggressive Sharpening of Standard and Stainless Steel thanks to the self-sharpening zircon corundum. High abrasion. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.
In stock1,11 € with VAT -
Abrasive fleece dia. 76mm QRC 800 medium thick, KLINGSPOR
Changeable Disc with Quick Change Disc - QRC800 Red Diameter: 76mm Type of Clamping: QRC Granularity: Medium (Medium) Usage: Lightweight Discharge, removing rust and paint. Suitable for all types of metals, paint, varnish and putty. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.
In stock131,35 € with VAT -
Abrasive fleece dia. 76mm QRC 800 coarse, KLINGSPOR
Changing Disc with Quick Change Disc - QRC800 Brown Diameter: 76mm Type of Clamping: QRC Grain: Coarse (COARSE) Usage: Lightweight Discharge, removing rust and paint. Suitable for all types of metals, paint, varnish and putty. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.
In stock2,60 € with VAT -
Velocite 6 oil for pneumatic tools - 0.5 liter, Mobile
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock6,51 € with VAT -
Velocite 6 oil for pneumatic tools - 5 liters, Mobile
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
On request47,13 € with VAT -
Velocite 6 oil for pneumatic tools - 1 liter, Mobile
Pneumatic / Air Tools Oil (pouring into a plastic container) Suitable for Lubrication of Pneumatic Systems - Viscosity Grade No. 6. High resistance to oxidation, protects against corrosion. Highly resistant to foaming, excellently separates water - holds moisture away from lubricating surfaces. Excellent for lubrication of precision bearings with low tolerance. Meets Classification / Specification: Cincinnati P-62 Viscosity Class ISO VG: 10 ASTM D 445 Viscosity at 40 ° C: 10.0 ASTM D 445 Viscosity at 100 ° C: 2,62 TOC, ASTM D 974: 0,06 mgKOH / g Copper corrosion, 3 hours at 100 ° C, ASTM D 130: 1A Anti-rust protection , Proc A, ASTM D 665: meets ASTM D 97: -15 ° C ASTM D 97: -15 ° C ASTM D 92: 180 ° C ASTM D 97: Density at 15 ° C, ASTM D 4052: 0.844 kg / l Oil should not be used for any other purpose than specified. Lubricating pneumatic tools is absolutely necessary, we recommend using the specified lubricators. Always follow the instructions for using specific tools.
In stock10,87 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!