Self-locking insert for thread repair - metric, length 1.0D, V-Coil
| M3x0,5 |
In stock
(10x)
|
0,25 € with VAT |
| M4x0,7 |
On request
|
0,25 € with VAT |
| M5x0,8 |
On request
|
0,28 € with VAT |
| 30mm , 2-fl. / TP.. 1603 |
On request
|
58,29 € with VAT |
| M6x1,0 |
In stock
(42x)
|
0,31 € with VAT |
| M8x1,25 |
In stock
(1x)
|
0,33 € with VAT |
| M10x1,5 |
On request
|
0,40 € with VAT |
| M12x1,75 |
On request
|
0,64 € with VAT |
| M14x2,0 |
On request
|
0,92 € with VAT |
| M16x2,0 |
On request
|
1,26 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- V-Coil
- Warranty:
- 24 months
Product information
Dimension and pitch: according to the selected variant
Length of the insert: 1.0 D (given in multiples of the nominal diameter of the thread being repaired)
* The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired
Standard: DIN 8140
Tolerance of the internal thread of the insert: ISO 2 (6H)
V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method.
Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7
Self-locking inserts are of particular importance when used in cases where there is vibration or shock stress. V-Coil offers self-locking inserts with sufficient security against loosening. This is achieved by the action of one or more polygonal clamping threads, which are distributed along the length of the insert in such a way that they also exert radial pressure on the internal thread (screw). Each clamping thread has a certain amount of tangential surfaces extending beyond the inner diameter of the loose insert. When screwing in, the bolt or screw moves along the clamping surfaces, which exerts pressure on the internal thread. After unscrewing the screw, the clamping thread assumes its original shape, after screwing the screw back in, sufficient radial pressure is maintained.
Variants
Accessories
-
Tthread repair tap - metric HSS 6-point , V-Coil
Machine tap for thread repair in battery drills Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 4,73 € with VAT -
Thread repair combined tap - metric HSS-G , V-Coil
Disposable tap for thread repair A drill is not needed to repair the thread - the tapper cuts the thread at once. Size of the repaired thread: according to the selected variant Material: HSS - High-speed steel Fitting: ISO1 / 4H Cuts a thread for V-Coil threaded inserts according to ISO 2 ( 6H ) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 16,43 € with VAT -
Thread repair forming machine tap - metric HSSE , V-Coil
Forming machine tap, for thread repair Size of the repaired thread: according to the selected variant Form : B Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After creating a thread with this tap, it is necessary to insert a stainless steel spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 17,27 € with VAT -
Thread repair spiral machine tap - metric HSSE , V-Coil
Machine tap in a spiral, for thread repair Size of the repaired thread: according to the selected variant Form : C Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 8,86 € with VAT -
Thread repair machine tap - metric HSSE, V-Coil
Machine tap with chip breaker, for thread repair Size of the repaired thread: according to the selected variant Form : B Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 9,11 € with VAT -
Thread repair tap - metric HSS, V-Coil
Machine tap for thread repair Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 7,68 € with VAT -
Thread Repair Kit - Metric , V-Coil
V-Coil kit for thread repair Dimension and pitch: according to the selected variant Contents of the set: according to the selected variant, see the attached catalog sheet for details The lengths of the inserts are always a multiple of the diameter of the thread being repaired, i.e. for example, if you are repairing an M6 thread and the set includes 1.5D inserts, then the length of the insert is 1.5 times 6mm, i.e. 9mm. If you need a shorter or longer insert, we can offer separately in lengths 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length doesn't suit you, you can adjust the length - cut, grind, pinch - as possible, just be careful - the inserts are stainless steel, it won't be easy. Thread repair method: 1. You drill out the damaged thread with the enclosed drill 2. You cut the thread with the attached (special) tapper (the use of other, e.g. common set or machine tappers does not work) 3. With the help of the supplied inserter, insert the insert to the desired depth (beware, the inserts cannot be turned back!) 4. Use a punch (if included in the set) or pliers to break out the insertion part on the insert
from 8,81 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!