Self-centering 3-jaw universal lathe chuck KUS M3 , Kovonastroje

A set of outer jaws for a three-jaw universal self-centering chuck KUS Size: according to the selected variant These jaws are called "classic" by turners. The jaws are not interchangeable with jaws of other brands!!! The jaws are completely heat treated / hardened.

Set of monobloc jaws for universal self-centering chuck KUS Size: according to the selected variant The lower clamping part with teeth is hardened, the top is soft - easily machinable. The jaws are not interchangeable with jaws of other brands!!!

Set of soft split jaws for self-centering universal chuck KUS Size: according to the selected variant The lower clamping part with teeth (with combs) is hardened, the screwed tops are machinable - soft The jaws are not interchangeable with jaws of other brands!!!

Set of internal jaws for a three-jaw universal self-centering chuck KUS Size: according to the selected variant These jaws are called "opposite" by turners. The jaws are not interchangeable with jaws of other brands!!! The jaws are completely heat treated / hardened.

Special synthetic white assembly lubricating paste / grease / vaseline - Lubex PAST NBI2 WHITE without the content of abrasive powdered metals with the content of PTFE / Teflon for clean assembly work. Quantity: 450g (in a can) Color: white/beige, glossy Base oil: synthetics Thickener: Calcium-sulfonate complex Working temperature: -30°C to 150°C High adhesion to the lubricated surface, very high resistance to washing out with water or cooling liquid. Suitable for lubrication of lathe, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Benefits of use : * Suitable as a paste for assembly work * Also suitable for non-ferrous metals * Prevents wear, contact and tribo corrosion * Excellent anti-friction and EP properties and high white solid grease content * Resistance to water, cooling and cutting fluids, alkalis and chemicals * Prevents corrosion at the material interface and wear corrosion in exposed cases *Thanks to the polymers it contains, the paste has exceptional toughness and resistance to washing out. This is a replacement for Mogul Calsul 2 WR (for lubrication of universal lathe chucks)