Self-centering 3-jaw universal lathe chuck KUS - DIN55029 , Kovonastroje
KUS 160/3 D4 |
In stock
(3x)
|
132,82 € with VAT |
KUS 160/3 D5 |
In stock
(8x)
|
132,82 € with VAT |
KUS 200/3 D5 |
In stock
(7x)
|
173,08 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Warranty:
- 24 months
Product information
Diameter: according to the selected variant
Clamping Camlock - size: according to the selected variant
Additional dimensions and parameters - see the attached PDF
Accuracy, throwability - see the attached PDF
Additional sets of internal and external faceplates can be purchased - see related products.
The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing.
The chuck is supplied in a paper box with Czech instructions.
Suitable e.g. for lathes with camlock DIN ISO 702-2
Variants
Accessories
-
Hard inside jaw IJS for 3-jaw chuck KUS , Kovonastroje
Set of internal jaws for a three-jaw universal self-centering chuck KUS Size: according to the selected variant These jaws are called "opposite" by turners. The jaws are not interchangeable with jaws of other brands!!! The jaws are completely heat treated / hardened.
from 25,60 € with VAT -
Soft sectional jaw SD for 3-jaw chuck KUS , Kovonastroje
Set of soft split jaws for self-centering universal chuck KUS Size: according to the selected variant The lower clamping part with teeth (with combs) is hardened, the screwed tops are machinable - soft The jaws are not interchangeable with jaws of other brands!!!
from 91,10 € with VAT -
Solid soft jaw MT for 3-jaw chuck KUS , Kovonastroje
Set of monobloc jaws for universal self-centering chuck KUS Size: according to the selected variant The lower clamping part with teeth is hardened, the top is soft - easily machinable. The jaws are not interchangeable with jaws of other brands!!!
from 32,40 € with VAT -
Hard outer jaw OJS for 3-jaw chuck KUS , Kovonastroje
A set of outer jaws for a three-jaw universal self-centering chuck KUS Size: according to the selected variant These jaws are called "classic" by turners. The jaws are not interchangeable with jaws of other brands!!! The jaws are completely heat treated / hardened.
from 25,40 € with VAT -
Plastic lubricant 450g for lubrication of chucks NBI 2 WHITE with PTFE, LUBEX
Special synthetic white assembly lubricating paste / grease / vaseline - Lubex PAST NBI2 WHITE without the content of abrasive powdered metals with the content of PTFE / Teflon for clean assembly work. Quantity: 450g (in a can) Color: white/beige, glossy Base oil: synthetics Thickener: Calcium-sulfonate complex Working temperature: -30°C to 150°C High adhesion to the lubricated surface, very high resistance to washing out with water or cooling liquid. Suitable for lubrication of lathe, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Benefits of use : * Suitable as a paste for assembly work * Also suitable for non-ferrous metals * Prevents wear, contact and tribo corrosion * Excellent anti-friction and EP properties and high white solid grease content * Resistance to water, cooling and cutting fluids, alkalis and chemicals * Prevents corrosion at the material interface and wear corrosion in exposed cases *Thanks to the polymers it contains, the paste has exceptional toughness and resistance to washing out. This is a replacement for Mogul Calsul 2 WR (for lubrication of universal lathe chucks)
In stock39,76 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!