SCLCR 2525 M12 lathe knife

Turning insert VBD CCMT 120404 - 16 IC830 Radius 0.4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, classic steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Cutting conditions - see attached photo Type 16: With chip breakers on the sides of the insert - suitable for frontal and side removal of material. Order no. no.: 3308170 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CCGT 120408 - AS IC20 Radius: 0,8mm Coating: uncoated, polished coating IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Ref. : 05540003

VBD CCMT 120404 SM IC9250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiN IC9250 Series: Solid substrate with enriched cobalt layer, MTCVD TiCN and alpha Al2O3 CVD coating. Suitable for conventional steel turning under various conditions - uninterrupted and intermittent cut, high stiffness and durability. Usage: Steel: P10-P35 Stainless Steel: M05-M20 Conditions: operation, ideal for machining non-traditional alloys Ref. No .: 5507020

Interchangeable insert CCMT 120408 - HMP NC3030 Radius: 0.8mm Blade material: NC3030 - Suitable for machining steels at medium to low speeds. Excellent wear resistance, high temperature stability due to Al2O3 coating. Excellent stability under various engagement conditions. Coating: MT-CVD: TiCN TiC Al2O3 TiN Application: Steel: P25-P35 Stainless steel: M15-M25 Type HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even when the depth of cut suddenly changes. The price is for 1 piece, not for the whole package, if you want to buy the whole package, add 10 pieces to the cart. Cat. No.:102023637

VBD CCGT 120402 - AS IC20 Radius: 0,4mm Coating: uncoated, polished coating IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Ref. : 05540019

Turning insert VBD CCGT 120402 - AL H01 Radius: 0,2mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Application: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min fn = 0.03-0.5 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCGT 120404 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Application: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min fn = 0.03-0.5 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CCGT 120404 - AS IC20 Radius: 0,4mm Coating: uncoated, polished coating IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Ref. : 05540003