Rubber-flex collet for reverse tapping head VTA, VERTEX

Variant:

Choose variant

FC-10 for VTA7-JT6	In stock (11x)	39,65 € with VAT
FC-11 for VTA7-JT6	In stock (10x)	39,65 € with VAT
FC-20 for VTA12-JT6	In stock (9x)	39,65 € with VAT
FC-21 for VTA12-JT6	In stock (6x)	39,65 € with VAT
FC-30 for VTA20-M20	In stock (5x)	39,65 € with VAT
FC-30 for VTA20-M20	In stock (7x)	39,65 € with VAT

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

Brand:: VERTEX
Warranty:: 24 months

Product information

Special collet for clamping taps into a VTA reverse tap with torque coupling

Clamping range of the collet: see label for individual variants
Diameter and other dimensions: see label for individual variants

To two collets fit each Vertex VTA thread cutter:

VTA7-JT6 thread cutter: FC-10 (2.5-4.5mm) and FC-11 (4.5-6.5mm) collets
Tap cutter VTA12-JT6 : collet FC-20 (4.0-7.0mm) and FC-21 (7.5-10.0mm)
Tap cutter VTA20-M20 : collet FC-30 (8.0 -12.0mm) and FC-31 (14.0-19.0mm)

Variants

FC-10 for VTA7-JT6

Code: 3404-030

In stock

39,65 € with VAT

FC-11 for VTA7-JT6

Code: 3404-031

In stock

39,65 € with VAT

FC-20 for VTA12-JT6

Code: 3404-032

In stock

39,65 € with VAT

FC-21 for VTA12-JT6

Code: 3404-033

In stock

39,65 € with VAT

FC-30 for VTA20-M20

Code: 3404-034

In stock

39,65 € with VAT

FC-30 for VTA20-M20

Code: 3404-035

In stock

39,65 € with VAT

Show all variants

Accessories

Reversible tapping head M8-M20 mandrel MK3 with torque coupling, VTA20-M20

Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 Screwdriver incl. collet and mandrel MK3 Screwdriver with adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change. Thread cutting is designed for threading max. M20 according to ISO 529/2283 (shank 14mm). If you have a tap made to DIN376 (16mm stem), it will be necessary to adjust the stem and quadrangle so that it is clamped into the threading.

In stock

593,89 € with VAT
Reversible tapping head M8-M20 mandrel MK4 with torque coupling, VTA20-M20

Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 Screwdriver including MK4 collet and pin Thread cutting has an adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change.

In stock

593,89 € with VAT
Reverse tapping head M8-M20 with torque coupling, VTA20-M20

Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 (the mandrel is to be purchased !!!) Screwdriver incl. pliers Screwdriver has an adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change. Thread cutting is designed for threading max. M20 according to ISO 529/2283 (shank 14mm). If you have a tap made to DIN376 (16mm stem), it will be necessary to adjust the stem and quadrangle so that it is clamped into the threading.

In stock

562,17 € with VAT
Reversible tapping head M3-M12 - JT6 with torque coupling, VTA12-JT6

Reversible tapping head suitable for M3-M12 dimensions Length compensation: max. 17mm extrusion Precision clamping - 2pcs. Clamping cone: JT6 Threading is including collet (s). Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Thorns for these thread heads can be purchased in versions MK2 and MK3

In stock

450,74 € with VAT
Reversible tapping head M2-M8 - JT6 with torque coupling, VTA7-JT6

Reversible die head suitable for M2-M8 dimensions Length compensation: max. 16mm extrusion Precision clamping - 2pcs Clamping cone: JT6 Screwdriver including collet (s). Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Thorns for these thread heads can be purchased in versions MK2 and MK3

In stock

393,10 € with VAT