Round thread die UNC - HSS, VOLKEL
| UNC no.1 x 64 |
On request
|
14,77 € with VAT |
| UNC no.2 x 56 |
In stock
(1x)
|
14,77 € with VAT |
|
In stock
(19x)
|
2,43 € with VAT | |
| UNC no.3 x 48 |
On request
|
14,33 € with VAT |
| UNC no.4 x 40 |
On request
|
13,21 € with VAT |
| UNC č.5 x 40 |
On request
|
13,21 € with VAT |
| UNC č.6 x 32 |
On request
|
13,21 € with VAT |
| UNC č.8 x 32 |
On request
|
13,21 € with VAT |
| UNC č.10 x 24 |
On request
|
13,21 € with VAT |
| UNC č.12 x 24 |
On request
|
13,21 € with VAT |
| UNC 1/4" x 40 |
On request
|
12,54 € with VAT |
| UNC 5/16" x 18 |
On request
|
14,33 € with VAT |
| UNC 3/8" x 16 |
On request
|
15,89 € with VAT |
| UNC 7/16" x 14 |
On request
|
18,46 € with VAT |
| UNC 1/2" x 13 |
On request
|
20,70 € with VAT |
| UNC 9/16" x 13 |
On request
|
25,63 € with VAT |
| UNC 5/8" x 11 |
On request
|
27,99 € with VAT |
| UNC 3/4" x 10 |
On request
|
27,99 € with VAT |
| UNC 7/8" x 9 |
On request
|
47,90 € with VAT |
| UNC 1" x 8 |
On request
|
47,90 € with VAT |
| UNC 1 1/8" x 7 |
On request
|
72,42 € with VAT |
| UNC 1 1/4" x 7 |
In stock
(1x)
|
72,42 € with VAT |
| UNC 1 3/8" x 6 |
On request
|
72,42 € with VAT |
|
On request
|
45,58 € with VAT | |
| UNC 1 1/2" x 6 |
On request
|
72,42 € with VAT |
| UNC 1 5/8" x 5 |
On request
|
129,39 € with VAT |
| UNC 1 3/4" x 5 |
On request
|
197,65 € with VAT |
| UNC 1 7/8" x 4,5 |
On request
|
197,65 € with VAT |
| UNC 2" x 4,5 |
On request
|
197,65 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- VOLKEL
- Warranty:
- 24 months
Product information
Thread type: UNC - Unified Coarse - American inch thread
Climb: in numbers of strokes per inch; UNC - basic climb (rough)
Thread tolerance - fitting: 2A
Top angle: 60 °
Material: HSS - high speed steel
Standard: DIN EN22568, ASME B1.1
* Average conversion: 1 "= 25.4mm
* Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges
Variants
Accessories
-
Machine tap UNC - HSSE TiN 2B spiral (40°) 800X , FANAR
Machine tap UNC spiral 800X Thread type: UNC (UNified thread Coarse) - American inch unified thread coarse Fitting: 2B Material: HSSE (High speed steel + 5%Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals
from 15,52 € with VAT -
Machine tap UNC - HSSE TiN 2B with chip breaker 800X, FANAR
UNC machine tap with straight groove and chip breaker 800X Thread type: UNC - American inch thread (UNified Coarse thread) Matching: 2B Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium nitride Ground thread profile Standard: DIN 371, DIN376 Usage: Steel Food stainless steel Cast iron Non-ferrous metals
from 14,29 € with VAT -
Machine tap UNC - HSSE PM-FAN TiAlSiN 2B spiral (40 °), FANAR
Recommended ✓Machine spiral tap (high speed) R40 PM TC 1200 in FAN helix Thread type: UNC (UNified thread Coarse) - American inch unified coarse thread Matching: 2B Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Top thread angle: 60 ° Helix angle: 40 ° Thread lead: C, 2 turns - see attached photo Ground thread profile Standard: DIN 371, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics
from 30,65 € with VAT -
Machine tap UNC - HSSE 2B spiral, VOLKEL
Machine tap spiral, for American unified whitworth thread Thread type: UNC (UNified thread Coarse) - American inch unified coarse thread Size: according to the chosen variant Matching: 2B Form: C Helix: 35 ° Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ANSI B 1.1 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes
from 14,33 € with VAT -
Machine tap UNC - HSSE 2B with chip breaker, VOLKEL
Machine tap, straight groove with chip breaker, for American unified whitworth thread Thread type: UNC - American inch thread (UNified Coarse thread) Size: according to the chosen variant Matching: 2B Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ANSI B 1.1 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 6,21 € with VAT
Alternatives
-
Round thread die UNC - HSS, CZTOOL
Circular thread dies Thread type: UNC - Unified Coarse - American inch thread Climb: in numbers of strokes per inch; UNC - basic climb (rough) Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - high speed steel Standard: DIN EN22568, ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges
from 8,64 € with VAT -
Round thread die UNC - HSS with chip breaker , CZTOOL
Circular thread dies with chip breaker Thread type: UNC - Unified Coarse - American inch thread Climb: in numbers of strokes per inch; UNC - basic climb (rough) Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - high speed steel Standard: DIN EN22568, ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges
from 10,88 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!