/ Registration
Not sure? tel: +420 602 716 471 e-mail: objednavky@kovonastroje.cz
CZ SK EN DE
Homepage ...
Metalworking tools
Thread cutting
Taps and dies
Threaded eyes
Inch American inch threads UNC Round thread die UNC 3/8 "x 16 z / 1" HSS, VOLKEL

Round thread die UNC 3/8 "x 16 z / 1" HSS, VOLKEL

Variant:
UNC no.1 x 64
On request
14,77 € with VAT
UNC no.2 x 56
In stock (1x)
14,77 € with VAT
In stock (19x)
2,43 € with VAT
UNC no.3 x 48
On request
14,33 € with VAT
UNC no.4 x 40
On request
13,21 € with VAT
UNC č.5 x 40
On request
13,21 € with VAT
UNC č.6 x 32
On request
13,21 € with VAT
UNC č.8 x 32
On request
13,21 € with VAT
UNC č.10 x 24
On request
13,21 € with VAT
UNC č.12 x 24
On request
13,21 € with VAT
UNC 1/4" x 40
On request
12,54 € with VAT
UNC 5/16" x 18
On request
14,33 € with VAT
UNC 3/8" x 16
On request
15,89 € with VAT
UNC 7/16" x 14
On request
18,46 € with VAT
UNC 1/2" x 13
On request
20,70 € with VAT
UNC 9/16" x 13
On request
25,63 € with VAT
UNC 5/8" x 11
On request
27,99 € with VAT
UNC 3/4" x 10
On request
27,99 € with VAT
UNC 7/8" x 9
On request
47,90 € with VAT
UNC 1" x 8
On request
47,90 € with VAT
UNC 1 1/8" x 7
On request
72,42 € with VAT
UNC 1 1/4" x 7
In stock (1x)
72,42 € with VAT
UNC 1 3/8" x 6
On request
72,42 € with VAT
On request
45,58 € with VAT
UNC 1 1/2" x 6
On request
72,42 € with VAT
UNC 1 5/8" x 5
On request
129,39 € with VAT
UNC 1 3/4" x 5
On request
197,65 € with VAT
UNC 1 7/8" x 4,5
On request
197,65 € with VAT
UNC 2" x 4,5
On request
197,65 € with VAT
Current price:
15,89 € with VAT
13,13 € without VAT
On request

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

EAN:
4022835234180
Brand:
VOLKEL
Warranty:
24 months
Code:
23418

Product information

Threaded eye with jaws / threaded eye with jaws

Size: UNC 3/8( corresponds to 9,525mm)
Pitch: 16 z / 1 "( courses per inch)
Tolerances thread - fitting: 2A
Outer eye diameter: 30mm

Material: HSS - High speed steel

American unified thread UNC - basic pitch
Top angle: 60°
Norma : DIN 223
Also complies with standard: DIN EN 22568

UNC thread: American inch thread with the same profile as the metric thread(60°), but with a pitch in inches
Download

Variants

UNC no.1 x 64
Code: 23401
On request
14,77 € with VAT
UNC no.2 x 56
Code: 23402
In stock
14,77 € with VAT
Code: PR-10.237-13
In stock
2,43 € with VAT
UNC no.3 x 48
Code: 23403
On request
14,33 € with VAT
UNC no.4 x 40
Code: 23404
On request
13,21 € with VAT
UNC č.5 x 40
Code: 23405
On request
13,21 € with VAT
UNC č.6 x 32
Code: 23406
On request
13,21 € with VAT
UNC č.8 x 32
Code: 23408
On request
13,21 € with VAT
UNC č.10 x 24
Code: 23410
On request
13,21 € with VAT
UNC č.12 x 24
Code: 23412
On request
13,21 € with VAT
UNC 1/4" x 40
Code: 23414
On request
12,54 € with VAT
UNC 5/16" x 18
Code: 23416
On request
14,33 € with VAT
UNC 3/8" x 16
Code: 23418
On request
15,89 € with VAT
UNC 7/16" x 14
Code: 23420
On request
18,46 € with VAT
UNC 1/2" x 13
Code: 23422
On request
20,70 € with VAT
UNC 9/16" x 13
Code: 23424
On request
25,63 € with VAT
UNC 5/8" x 11
Code: 23426
On request
27,99 € with VAT
UNC 3/4" x 10
Code: 23430
On request
27,99 € with VAT
UNC 7/8" x 9
Code: 23434
On request
47,90 € with VAT
UNC 1" x 8
Code: 23438
On request
47,90 € with VAT
UNC 1 1/8" x 7
Code: 23442
On request
72,42 € with VAT
UNC 1 1/4" x 7
Code: 23446
In stock
72,42 € with VAT
UNC 1 3/8" x 6
Code: 23450
On request
72,42 € with VAT
Code: KCZ-1156.3
On request
45,58 € with VAT
UNC 1 1/2" x 6
Code: 23452
On request
72,42 € with VAT
UNC 1 5/8" x 5
Code: 23458
On request
129,39 € with VAT
UNC 1 3/4" x 5
Code: 23462
On request
197,65 € with VAT
UNC 1 7/8" x 4,5
Code: 23466
On request
197,65 € with VAT
UNC 2" x 4,5
Code: 23470
On request
197,65 € with VAT
Show all variants

Accessories

  • Machine tap UNC 3/8 "x 16, 2B DIN371 spiral HSSE, VOLKEL

    Machine tap UNC 3/8 "x 16, 2B DIN371 spiral HSSE, VOLKEL

    Machine Tap, Spiral, US Unified Whitworth Thread Size: UNC 3/8 x 16 (equivalent to 9.525mm) Gradient: 16 Strokes per inch Form: C Screwdrivers: 35 ° Material: HSSE - Rapid Cutting Steel 5% Co5 Usage: Highly workable materials up to 900 N / mm2 < br> Unalloyed and low alloy steels For blind holes

    In stock
    20,15 € with VAT

  • Machine tap UNC 3/8 "x 16, 2B DIN376 spiral HSSE, VOLKEL

    Machine tap UNC 3/8 "x 16, 2B DIN376 spiral HSSE, VOLKEL

    Machine Tap, Spiral, US Unified Whitworth Thread Size: UNC 3/8 x 16 (equivalent to 9,525mm) Gradient: 16 Strokes per inch Form: C Screwdrivers: 35 ° Material: HSSE - Rapid Steel 5% Co5 Cobalt Standard: ANSI B 1.1, DIN376 Usage: Highly workable materials up to 900 N / mm2 < br> Unalloyed and low alloy steels For blind holes

    In stock
    20,15 € with VAT

  • Machine thread UNC 3/8 x 16 HSSE PM-FAN TiAlSiN 2B DIN371 spiral (40°) , FANAR

    Machine thread UNC 3/8 x 16 HSSE PM-FAN TiAlSiN 2B DIN371 spiral (40°) , FANAR
    Recommended ✓

    Machine spiral tap ( high-speed ) UNC 3/8 R40 PM TC 1200 in FAN helix Dimension: 3/8" ( = 9.525mm) Number of strokes per inch: 16 Fitting: 2B, ground thread profile Standard: DIN 371 Thread lead: C, 2 courses - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, production by sintering ) Ground thread profile Coating: TiAlSiN Helix angle: 40° Use: 1.4: Alloy steels, tool steel cold drawn up to 1000N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 3.3 : Nodular and tempered cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.3 : Structural and carbon steel, low alloy steel, steel castings up to 1100N/mm2 6.4 : Bronze and aluminum up to 1200N/mm2 7.4: Aluminum alloys with silicon content Si > 10%, up to 400N/mm2 8.2: Thermoplastics and hardened plastics

    In stock
    30,65 € with VAT

  • Machine tap UNC 3/8 "x 16, 2B DIN376 with chip breaker HSSE, VOLKEL

    Machine tap UNC 3/8 "x 16, 2B DIN376 with chip breaker HSSE, VOLKEL

    Machine tap, straight groove with chamfer, American unified whitworth thread UNC 3/8 "x 16 (equivalent to 9,525mm) Gradient: 16 strokes per inch Form: B < br> Material: HSSE - 5% Cobalt Co5 Standard: ANSI B 1.1, DIN376 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low Alloy Steel For Through Hole

    In stock
    17,01 € with VAT

  • Machine tap UNC 3/8 "x 16, 2B DIN371 with chip breaker HSSE, VOLKEL

    Machine tap UNC 3/8 "x 16, 2B DIN371 with chip breaker HSSE, VOLKEL

    Machine tap, straight groove with chamfer, on American unified whitworth thread UNC 3/8 "x 16 (9.525mm) < br> Material: HSSE - Steel 5% cobalt Co5 Standard: ANSI B 1.1, DIN371 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and Low Alloy Steel For Through Hole

    In stock
    16,35 € with VAT

  • Machine tap UNC 3/8 x 16 HSSE TiN 2B DIN371 spiral 800X, FANAR

    Machine tap UNC 3/8 x 16 HSSE TiN 2B DIN371 spiral 800X, FANAR

    Machine tap ( high-speed ) UNC 3/8-16 800X spiral, in helix Dimension: 3/8 ( = 9.525mm) Number of strokes per inch: 16 Fitment: 2B, ground thread profile Standard: DIN 371 Thread lead: C, 2 courses - see attached photo Material: HSSE( High-speed steel 5% Cobalt) Ground thread profile Coating: TiN Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

    In stock
    23,85 € with VAT

  • Machine tap UNC 3/8 x 16 HSSE TiN 2B DIN371 with chip breaker 800X, FANAR

    Machine tap UNC 3/8 x 16 HSSE TiN 2B DIN371 with chip breaker 800X, FANAR

    Machine tap ( high-speed ) UNC 3/8-16, 800X with chip breaker Dimension: 3/8 ( = 9.525mm) Number of strokes per inch: 16 Fitment: 2B, ground thread profile Standard: DIN 371 Thread pitch: B, 4-5 courses - see attached photo Material: HSSE( High-speed steel 5% Cobalt) Ground thread profile Coating: TiN Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

    In stock
    22,13 € with VAT

  • Hand tap UNC 3/8 HSS 2B - set, CZTOOL

    Hand tap UNC 3/8 HSS 2B - set, CZTOOL

    UNC 3/8 "American Hand Tap - UNC 3/8 (9.525mm) Standard: DIN 352 Material: HSS - High-Speed ??Steel UNC - Unified Thread Coarse (Unification of US and British Whitworth Thread)

    In stock
    22,70 € with VAT

  • Hand tap UNC 3/8 HSS 2B - set, VOLKEL

    Hand tap UNC 3/8 HSS 2B - set, VOLKEL

    UNC 3/8 "American Hand Tap - UNC 3/8 (9.525mm) Standard: DIN 352 Material: HSS - High-Speed ??Steel UNC - Unified Thread Coarse (Unification of US and British Whitworth Thread)

    On request
    18,80 € with VAT

Alternatives

  • Round thread die UNC 3/8 "x 16 z / 1" HSS, CZTOOL

    Round thread die UNC 3/8 "x 16 z / 1" HSS, CZTOOL

    Threaded eye with jaw / threaded eye with jaws 3/8 "x16 Size: UNC 3/8 (equivalent to 9,525mm) Grip: 16 turns per inch Thread tolerance - fitting: 2A < DIN EN 22 568 UNC (Unified Coarse) Thread UNC: American thumb thread with the same profile as metric thread (60 °), but with inches inches

    In stock
    11,43 € with VAT

Do you need advice?

Jakub Novák, Orders

How do customers see us?

Certified customer, 19.November 2024
"levně, rychle, spolehlivě"
Certified customer, 30.October 2024
"vše OK"

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!