Round thread die UNC 1/2 "x 13 z / 1" HSS, VOLKEL
UNC no.1 x 64 |
On request
|
14,77 € with VAT |
UNC no.2 x 56 |
In stock
(1x)
|
14,77 € with VAT |
In stock
(19x)
|
2,43 € with VAT | |
UNC no.3 x 48 |
On request
|
14,33 € with VAT |
UNC no.4 x 40 |
On request
|
13,21 € with VAT |
UNC č.5 x 40 |
On request
|
13,21 € with VAT |
UNC č.6 x 32 |
On request
|
13,21 € with VAT |
UNC č.8 x 32 |
On request
|
13,21 € with VAT |
UNC č.10 x 24 |
On request
|
13,21 € with VAT |
UNC č.12 x 24 |
On request
|
13,21 € with VAT |
UNC 1/4" x 40 |
On request
|
12,54 € with VAT |
UNC 5/16" x 18 |
On request
|
14,33 € with VAT |
UNC 3/8" x 16 |
On request
|
15,89 € with VAT |
UNC 7/16" x 14 |
On request
|
18,46 € with VAT |
UNC 1/2" x 13 |
On request
|
20,70 € with VAT |
UNC 9/16" x 13 |
On request
|
25,63 € with VAT |
UNC 5/8" x 11 |
On request
|
27,99 € with VAT |
UNC 3/4" x 10 |
On request
|
27,99 € with VAT |
UNC 7/8" x 9 |
On request
|
47,90 € with VAT |
UNC 1" x 8 |
On request
|
47,90 € with VAT |
UNC 1 1/8" x 7 |
On request
|
72,42 € with VAT |
UNC 1 1/4" x 7 |
In stock
(1x)
|
72,42 € with VAT |
UNC 1 3/8" x 6 |
On request
|
72,42 € with VAT |
On request
|
45,58 € with VAT | |
UNC 1 1/2" x 6 |
On request
|
72,42 € with VAT |
UNC 1 5/8" x 5 |
On request
|
129,39 € with VAT |
UNC 1 3/4" x 5 |
On request
|
197,65 € with VAT |
UNC 1 7/8" x 4,5 |
On request
|
197,65 € with VAT |
UNC 2" x 4,5 |
On request
|
197,65 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 4022835234227
- Brand:
- VOLKEL
- Warranty:
- 24 months
- Code:
- 23422
Product information
Size: UNC 1/2( corresponds to 12,70mm)
Pitch: 13 z / 1 "( courses per inch)
Thread tolerance - fitting: 2A
Outer eye diameter: 38mm
Material: HSS - High speed steel
American unified thread UNC - basic pitch
Top angle: 60°
Standard: DIN 223
Standard: DIN EN 22568
UNC thread: American inch thread with the same profile as the metric thread(60°), but with a pitch in inches
Variants
Accessories
-
Machine tap UNC 1/2 x 13, 2B DIN376 spiral HSSE, VOLKEL
Machine Tap, Spiral, US Unified Whitworth Thread Size: UNC 1/2 x 13 (equivalent to 12.70mm) Angle: 13 Strokes per inch Form: C Screwdrivers: 35 Material: HSSE - 5% Cobalt Co5 Standard: ANSI B 1.1, DIN376 Usage: Highly workable materials up to 900 N / mm2 Non-alloy and low alloy steels For blind holes
In stock24,28 € with VAT -
Machine tap UNC 1/2 "x 13, 2B DIN376 with chip breaker HSSE, VOLKEL
Machine Tap, Straight Groove With Chip Breaker, US Unified Whitworth Thread Size: UNC 1/2 "x 13 (12.70mm) Form: B Material: HSSE - Rapid Steel 5% Cobalt Co5 Standard: ANSI B 1.1, DIN376 Usage: Highly workable materials up to 900 N / mm2 < br> Unalloyed and low alloy steels For through holes
In stock20,26 € with VAT -
Machine thread UNC 1/2 x 13 HSSE TiN 2B DIN376 spiral 800X, FANAR
Machine tap ( high-speed ) UNC 1/2-13 800X spiral, in helix Dimension: 1/2 ( = 12.7mm) Number of strokes per inch: 13 Fit : 2B, ground thread profile Standard: DIN 376 Thread lead: C, 2 courses - see attached photo Material: HSSE( High-speed steel 5% Cobalt) Ground profile thread Coating: TiN Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals
In stock34,33 € with VAT -
Machine tap UNC 1/2 x 13 HSSE PM-FAN TiAlSiN 2B DIN376 spiral (40°) , FANAR
Recommended ✓Machine spiral tap ( high-speed ) UNC 1/2 R40 PM TC 1200 in FAN helix Dimension: 1/2" ( = 12.7mm) Number of strokes per inch: 13 Fit: 2B, ground thread profile Standard: DIN 376 Thread lead: C, 2 courses - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, production by sintering ) Grounded thread profile Coating: TiAlSiN Helix angle: 40° Use: 1.4: Alloy steels, cold drawn tool steel up to 1000N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 3.3 : Ball and tempered cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.3 : Structural and carbon steel, low alloy steel, steel castings up to 1100N/mm2 6.4 : Bronze and aluminum up to 1200N/mm2 7.4 : Aluminum alloys with silicon content Si > 10%, up to 400N/mm2 8.2 : Duroplastics and hardened plastics
In stock36,49 € with VAT -
Machine tap UNC 1/2 x 13 HSSE TiN 2B DIN376 with chip breaker 800X, FANAR
Machine tap ( high-speed ) UNC 1/2-13, 800X with chip breaker Dimension: 1/2 ( = 12.7mm) Number of strokes per inch: 13 Fit : 2B , ground thread profile Standard : DIN 376 Thread pitch : B , 4-5 courses - see attached photo Material : HSSE( High-speed steel 5% Cobalt) Ground thread profile Coating: TiN Use: Steel Food grade stainless steel Cast iron Non-ferrous metals
In stock31,88 € with VAT
Alternatives
-
Round thread die UNC 1/2 "x 13 z / 1" HSS, CZTOOL
Threaded eye with jaw / threaded eye with jaws 1/2 "x13 Size: UNC 1/2 (equivalent to 12,700mm) Grip: 13 strokes per inch Thread tolerance - fitting: 2A < DIN EN 22 568 Material: HSS - High Speed ??Steel (UNC) Thread UNC: American thumb thread with the same profile as metric thread (60 °), but with inches inches
In stock17,75 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!