Reamers

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 32.50-36.50mm (1 9/32" - 1 7/16") Type designation: T16 Blade length: 116mm Total length: 320mm Square: 18.0mm Diameter of clamping shank: 22.4mm Standard: ČSN 221424 Code designation : 261.164 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 36.00-40.40mm (1 9/32" - 1 7/16") Type designation: T17 Length of blades: 127mm Total length: 355mm Square: 20.0mm Diameter of clamping shank: 25.0mm Standard: ČSN 221424 Code designation : 261.171 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 40.00-45.00mm (1 19/32" - 1 3/4") Type designation: T18 Blade length: 143mm Total length: 390mm Square: 22.4mm Diameter of clamping shank: 28.0mm Standard: ČSN 221424 Code designation : 261.188 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 44.50-50.00mm (1 3/4" - 1 31/32") Type designation: T19 Blade length: 161mm Total length: 435mm Square: 25.0mm Diameter of clamping shank: 31.5mm Standard: ČSN 221424 Code designation : 261.195 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 49.50-55.00mm (1 31/32" - 2 5/32") Type designation: T20 Blade length: 161mm Total length: 435mm Square: 28.0mm Diameter of clamping shank: 33.5mm Standard: ČSN 221424 Code designation : 261.201 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 54.50-60.00mm (2 5/32" - 2 11/32") Type designation: T21 Blade length: 161mm Total length: 435mm Square: 31.5mm Diameter of clamping shank: 40.0mm Standard: ČSN 221424 Code designation : 261.218 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Right-handed metal / plastic drill bit Diameter: 10,9mm Usage: Metal, plastic (hobby) Material: HSS ČSN 221121 - DIN 338

Chisel Grooving Hammer SDS Clamping Shape: Groove, Overall Length 250mm Groove 22mm

Set of IMBUS Extended Heads on Square 1/2 ", Length 100mm Set contains: H5, H6, H7, H8, H9, H10, H12, H13, H14, H17 Material: S2

SDS plus chisel to the demolition, drilling hammer Clamping SDS Diameter 14mm Overall length 250mm Shape: spike

Chisel Pin with SDS Max Shank Overall Length 280mm Diameter 18mm Shape: Spike

Flat Chisel with SDS Max Shank Width 40mm Diameter 18mm Overall Length 280mm Shape: Flat