RCMT

VBD DCGT 11T302 - AS IC907, ideal for superfinishing, continuous cutting Radius: 0,2mm Coating: PVD, TiAlN TiN IC907 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - superfinishing: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Superslitin: S05-S20 Hardened: H05-H15 for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Cat. No .: 5591012

Inserts insert VBD RCGT 0602MO - AL H01 Insert diameter: 6mm Radius insert: 3mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.05-0.2 mm / rev. ap = 0,5-2,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Insert lathe insert VBD RCGT 0803MO - AL H01 Insert diameter: 8mm Radius insert: 4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.06-0.25 mm / rev. ap = 0,5-2,5 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD RCGT 10T3MO - AL H01 Insert diameter: 10mm Radius insert: 5mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.5 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD RCGT 1204MO - AL H01 Insert diameter: 12mm Radius insert: 6mm Hole for Screw: M4( as well as Pramet) Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.4 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD RCMT 0602MOE - FM; T9325, PRAMET Plate diameter: 6mm Plate material: T9325 Usage: Steel: P15-P35 Stainless Steel: M10-M25 Cast Iron: K20-K35 Superslitin (Ni, Co, Fe, Ti) No .: 80016047

T9325 < Application: Steel: P15-P35 Stainless Steel: M10-M25 Cast Iron: K20-K35 Superslitin (Ni, Co, Fe, Ti ): S20-S30 Cat. No. 80016877

Lathe insert VBD RCMT 0803MOE - UR ;T8430 , PRAMET Plate diameter: 8mm Wafer material: T8430 - PVD (TiBN + TiN + AlTiN) It is the most versatile material for general turning and heavy roughing, even under very adverse conditions. It was developed for steel and cast steel, but also has excellent results in stainless steels, cast irons and superalloys. Usage : Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Non-ferrous metals: N15-N30 Cat. no.: 80032899 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD RCMT 10T3MOE - UR ;T8430 , PRAMET Insert diameter: 6mm Lathe material: T8430 - PVD (TiBN TiN AlTiN) It is the most universal material for general turning and heavy roughing, even under very adverse conditions. It was developed for steel and cast steel, but also has excellent results in stainless steels, cast irons and superalloys. Usage: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Non-ferrous metals: N15-N30 Cat. no.: 80032900 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD RCMT 0602MOE - UR ;T8430 , PRAMET Insert diameter: 6mm Lathe material: T8430 - PVD (TiBN TiN AlTiN) It is the most versatile material for general turning and heavy roughing, even under very adverse conditions. It was developed for steel and cast steel, but also has excellent results in stainless steels, cast irons and superalloys. Usage: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Non-ferrous metals: N15-N30 Cat. no.: 80033065 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD RDMT1003MOT TN7525 Art. No. 2012534 GERMANY 111775265I2EE