Puller sets

Puller for springs for passenger cars. Supplied as a pair. Overall length 300mm Maximum opening 260mm. Suitable for spring diameter max. 15mm. Screw diameter: M. Hexagonal Tensioning 24mm

Puller for springs for passenger cars. Supplied as a pair. Overall length 360mm Maximum opening 340mm. Suitable for spring diameter max. 15mm. Screw diameter: M. Hexagonal Tensioning 24mm

Set of rotors, motorcycles (ignition) This set includes motorcycle pullers for most of the world's brands M14x1,5P M16x1,5P M18x1, 5P M19x1P M20x1P M22x1P M22x1,5P M24x1P M25x1,5P M26x1,5P M26x1P M27x1P M27x1,25P < br> M28x1P M28x1,5P

Puller / puller for inner bearings with adapters This kit is suitable for bearings with an inner diameter of 8 to 58 mm Kit contains: 1x Sliding hammer 1x Puller 1x Set of 10 adapters: 8-11mm, 12-17mm, 18-23mm, 24- 29mm, 30-34mm, 34-38mm, 39-43mm, 44-48mm, 49-53mm, 54-58mm 1x threaded extension M10x1,5 / M10x1,5 1x threaded reduction M10x1,5 / M8x1,25 1x threaded reducer M10x1,5 / M6x1,0 1x spare screw for adapter 1x Case Technical data: Total length of the sliding hammer: 390mm Clamping thread of the drawbar of the hammer: M10 Weight of the hammer( slip no. Part): 850 g Usage: The kit allows you to disassemble the bearings from the bearing after disassembling the shaft. The set is intended for bearings with a hole diameter of 8 â € “58mm Adapters are intended for bearing disassembly, which are inserted into the bearing bore and, after expansion, are firmly held behind its inner ring. The kit contains 10 adapters. A sliding / reversible hammer or a puller is used to develop the pulling force. Instructions for use: - see attached photos and video 1. Select the appropriate collet according to the bearing size 2. Insert the collet into the hole “so that its edges are behind the bearing ring 3. Screw / unscrew the middle mandrel of the collet with two wrenches until the collet is fastened / disassembled in the bearing ring 4. Attach the collet to the slide of the slide hammer or to the puller 5. Move the hammer back sharply so that it strikes the bar adjusting ring. When using the puller, it is enough to gradually tighten - always tighten for a while and wait for

Set of Bearing Pullers Set of Pulley Bearing Pullers 32 - 56 mm and 56 - 78 mm 7 " < br> Supplied in plastic box Cat. No.: 77502

Set - puller for arms 2 and 3 arm set 12 in 1 // puller of bearings 2-arm 3-arm, exchangeable arms Puller 2 and 3 arm - set 12pcs for external Internal bearings Maximum range: 135mm outer bearing / 160mm inner bearing Arm length: 100mm / 210mm / 255 mm Set contains: 1x three-arm puller 1x two-arm puller 1x central tightening screw 165mm with ball 1x central tightening screw screw 275mm with ball 3x arm 100mm 3x arm 210mm 3x arm 255mm Material: Cr-V Cr-Mo

Bearing Puller, Clamping Clamp with Extra Long Arm / Extension 1 Clamp Puller 75-105mm 1x 200mm pull-out torch with adapter adapter 1x centrally adjusting screw 280mm 2x 260mm pull-out bolt 2x 260mm extension bolt (extension to side pull-out screws ) Material: hardened steel