PTG

3-edged right-cut ground spiral cobalt drill bit for steel and stainless steel with cylindrical shank Diameter: according to the selected variant Drill length: Short series - see attached photo for lengths Material: HSSE - High speed steel + Co5 / HSSCo5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage : Stand and column drills, NC and CNC machines, possibly also hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages : Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.

Multi-purpose right-cut ground twist drill / "tooth drill" with cylindrical shank - with graduated tip Diameter: according to the selected variant Drill length: Short series - see attached photo for lengths The graduated tip is from a diameter of 2.5 mm From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: - universal Steel, cast iron, hardwood, plastic, acrylic glass, non-ferrous metals Advantages : Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Set of SK carbide / carbide technical milling cutters, double cut Material: TK( SK) Bore diameter: 6mm Hole lka runner - see listing below Clamping shank diameter: 6mm The set includes cutters(zleva): 1. ZYAS0616(ZYB0616), length 56mm 2. WRC0616, length 56mm 3. KUD0605, length 48mm 4. RBF0618, length 60mm 5. SPG0618, length 60mm * these cutters can also be purchased separately - see related products Usage: Cross teeth are suitable for machining difficult-to-machine materials High-alloy steel, cast iron, stainless steel, heat-resistant steel Suitable for chamfering, needling, removal Cleaning, surface repair after welding, shaping surfaces

Set of SK carbide / carbide technical milling cutters, double cut Material: TK( SK) Bore diameter: 8mm Hole lka runner - see listing below Clamping shank diameter: 6mm The set includes cutters(zleva): 1. ZYAS0820(ZYB0820), length 61mm 2. WRC0820, length 61mm 3. KUD0807, length 48mm 4. RBF0820, length 61mm 5. SPG0820, length 61mm * these cutters can also be purchased separately - see related products Usage: Cross teeth are suitable for machining difficult-to-machine materials High-alloy steel, cast iron, stainless steel, heat-resistant steel Suitable for chamfering, needling, removal Cleaning, surface repair after welding, shaping surfaces

SK set of carbide / carbide technical milling cutters, double cut Material: TK( SK) Diameter: 10mm Hole lka runner - see listing below Clamping shank diameter: 6mm The set includes cutters(zleva): 1. ZYAS1020(ZYB1020), length 61mm 2. WRC1020, length 61mm 3. KUD1009, length 50mm 4. RBF1020, length 61mm 5. SPG1020, length 61mm * these cutters can also be purchased separately - see related products Usage: Cross teeth are suitable for machining difficult-to-machine materials High-alloy steel, cast iron, stainless steel, heat-resistant steel Suitable for chamfering, needling, removal Cleaning, surface repair after welding, shaping surfaces

Set of SK carbide / carbide technical milling cutters, double cut Material: TK( SK) Bore diameter: 12mm Hole lka runner - see listing below Clamping shank diameter: 6mm The set includes cutters(zleva): 1. ZYAS1225(ZYB1225), length 66mm 2. WRC1225, length 66mm 3. KUD1210, length 51mm 4. RBF1225, length 66mm 5. SPG1225, length 66mm * these cutters can also be purchased separately - see related products Usage: Cross teeth are suitable for machining difficult-to-machine materials High-alloy steel, cast iron, stainless steel, heat-resistant steel Suitable for chamfering, needling, removal Cleaning, surface repair after welding, shaping surfaces