Probes and centrifuges

Centering angle - a practical helper that you can use to easily find the center of a circle. Dimensions: according to the selected variant Metal design with scale Supplied in a leather case

Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signal and Acoustic Signal Signal. It lights up as soon as the metal ball touches the workpiece and the acoustic signal sounds The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 20mm Diameter of the body 18mm Diameter of the ball: 10mm Overall length: 157mm Length of the clamping part: 77mm Also in the Z axis , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive engages unintentionally! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

Touch Sensor / Detector / Edge Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signal and Acoustic Signal Signal. It lights up as soon as the metal ball touches the workpiece and the acoustic signal sounds The ball is mounted on the spring, allowing it to be deflected. Diameter of Clamping Part: 32mm Body Diameter 18mm Diameter of Ball: 10mm Overall Length: 157mm Clamping Length: 74mm Z axis also works , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive engages unintentionally! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signaling. It lights up once the metal ball touches the workpiece The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 20mm Diameter of the body 16mm Diameter of the ball: 10mm Overall length: 157mm Length of the clamping part: 77mm The Z axis also works , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive goes unsteady! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

Touch Sensor / Detector / Sensor for X and Y Axes High Sensitivity Position Sensor Red LED Signaling. It lights up once the metal ball touches the workpiece The ball is mounted on the spring, allowing it to be deflected. Diameter of the clamping part: 32mm Diameter of the body 16mm Diameter of the ball: 10mm Overall length: 157mm Clamping length: 74mm The Z axis also works , but does not have a bump of the balls - damage / destruction of the sensor may occur if the drive goes unsteady! Works only with metallic materials where there is electrical contact between the ball and the body of the probe. The probe is approaching - ie always use without speed!

Touch Sensor / Probe / Sensor for X and Y Axes High Sensitivity Position Sensor Accuracy 0.003mm Speed: 600-1000 rpm. Diameter of Clamping Part: 10mm Body Diameter 10mm Body Diameter 5mm Overall Length: 78mm Clamping Length: 26mm

Touch Probe / Edge Sensor, Visual Inspection Clamping Diameter: 10mm Overall Length: 85mm Diameter: 4mm and 10mm Measurement accuracy: 0.003mm, depending on your sight Max. speed: 600 rpm. Clamping in the Spindle Milling Machine Ties: 60 HRC Material: Stainless Steel / INOX Application: When the mandrel touches the object, the upper and lower half of the mandrel deflects After moving back to the so-called point (touch), both parts are centered At this point, the spindle axis from the tool is exactly 2mm (5mm) - depending on whether you are driving a small or large diameter spindle. 3402-103

CNC Retractable Cube Lighting When Touching the Electric Circuit Board and Touching a Dice : 18mm Battery type: LR44 (2pcs included) Application: For positioning the spindle position relative to the workpiece - both horizontally and vertically Clamping with 2 circular magnets on the underside < 3403-002

CNC Cube Rear Dial with Dial Indicator Height: 50mm Accuracy: -0.008mm Base Diameter: 50mm Diameter Dial: 40mm Indicator Splitting: 0,01mm Application: Positioning of the spindle against the workpiece - horizontally and vertically Clamping with 2 circular magnets on the underside 3403-022

CNC Alternating Cube for Height Determination with External Dial Indicator Height: 50mm Accuracy: -0.008mm Base Diameter: 68mm Diameter Dial: 47mm Indicator Splitting : 0,01mm Application: Positioning of the spindle to the workpiece - horizontally and vertically Clamping with 3 circular magnets on the underside 3403-023

Stainless Steel CNC Retractable Cube Lighting (When Closing the Electrical Circuit of the Base and the Touch of a Dice) Touch: 18mm Battery type: LR44 (2pcs included) Application: To position the spindle position relative to the workpiece - both horizontally and vertically Clamping with 2 circular magnets on the underside Base material: INOX / stainless steel 3403-032

3D centering probe Diameter: 4mm, Touch length: 33mm Radial division: 0,01mm Axial division: 0,0032mm Radial measuring range: 0-10mm Divergence : 0,01mm Clamping Diameter: 20mm Can be Supplied with Touch 8mm, Length 65mm Ord. code: 251500 U3D Spare code for code: 251520 (short), 251530 (long)