Polishing material

Soft Velcro fastener 75 mm Abrasive cutter carrier. Thorough cuts, polishing lambs and felt polishing wheels can be done. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill. The drill bit is 6mm in diameter

Foam polishing disc Diameter 125mm Height 25mm Suitable for fine polishing of paint, plastic, car lights / lamps with suitable paste

Felt disc Diameter 100mm, thickness 15mm Application: grinding and polishing of metals and plastics, especially small parts Grinding: Satimax wheel of the grain size Polishing: polishing wheel disc according to polished material < The disc is also suitable for polishing small parts - screws and nuts - it does not remove them from the hand as well as cloth discs. The clamping pin with washers is included in the scope of delivery. The diameter of the clamping portion of the mandrel is 6.5 mm

Set of polishing material For grinding and polishing of wood, steel, plastic, copper, nickel, zinc, sheet The set consists of the following components: 1. disc diameter 100mm, thickness 13mm, hole 12,7mm 2. Ribbed disc with 100mm diameter 3. abrasive paste (blue) - 100g 4. paste polishing (white) - 100g 5. clamping mandrel for clamping the blades into the drill. Shank diameter 6mm Max. 3000 revolutions per minute

Set of abrasive bodies (stones, smiggles, filc) The set contains bodies on a 3,15 mm diameter spindle, adapters and replaceable abrasive bodies, which are mounted on the attached adapters. Suitable for grinding and polishing of wood, plastic, metal Suitable for use in hand pneumatic or electric grinders

Polishing paste green Absorption 2 (fine) Suitable for high gloss: Stainless steel, steel, brass, copper Weight of paste without packaging 100g

Polishing Blue 100g

Gray polishing paste 5 (rough) 100g

Polishing kits for car plastics and plexiglass The set is designed for renovation, polishing and protection of hardened plastic, plexiglass and up to approx. 0,3m2 area (minimum 2 headlights). One package is sufficient to refurbish, polish and protect the surface of the front and rear lights of a passenger car. Bare with Carnauba wax, protect the surface after the renovation from weather conditions and increase its UV stability. To remove scratches, pits from stones, scraps and other surface defects in tempered parts not only of clear plastics intended for motoring, etc. For use, you only need a conventional drill or water drill with a little dishwashing or liquid detergent soaps. The product is not intended for the renovation of glass lamps! Package Contents: 75mm HANDLE HANDLE (Velcro) - Used for grinding and polishing with Velcro fasteners with classic and cordless drills. BRUSHES 77mm (Velcro) - 2x grain 240 (for very damaged surface), 2x500, 2x1000, 2x1500, 2x2000. MOLLITE POLISHING CUTTER 85 mm (Velcro) CAREX 50g POLISHING PASTE RIGHT NATURAL Brazilian KARNAUBE WAVE - 5 ml (about 20 applications) FINE POLISHING APPLIER 2 PIECES

Soft cloth polishing pad Material: technical cloth - fabric made from a mixture of wool and other natural fibers. Application: Suitable for I. and II. degree of polishing according to the hardness of the polished material. Outer Diameter: 280mm Wheel Thickness: 20mm Opening for Shaft: 55mm

Felt body oval - 20/10 on stopper Felt body oval, felt disc Diameter: 20 mm Length: 10 mm Stopwatch diameter: 6 mm Stopwatch length: 43 mm Material composition: technical rigid felt (density: 0.56g / cm3) Oval ends Felt bodies suitable for high gloss of metals, gold, silver, non-ferrous metals, brass, aluminum using a polishing paste.

Felt body oval - 20/15 per stem Felt body oval, felt disc Diameter: 20 mm Length: 15 mm Stopwatch diameter: 6 mm Stopwatch length: 43 mm Material composition: technical rigid felt (density: 0.56g / cm3) Oval ends Felt bodies suitable for high gloss of metals, gold, silver, non-ferrous metals, brass, aluminum using a polishing paste.