Pneumatic tap M14-M24 with adjustable arm, VAT-1924
| M3-M8 / TC-312 |
On request
|
1.792,75 € with VAT |
| M5-M12 / TC-312 |
On request
|
1.792,75 € with VAT |
| M8-M16 / TC-820 |
On request
|
2.843,02 € with VAT |
| M10-M20 / TC-820 |
On request
|
3.215,82 € with VAT |
| M12-M22 / TC-820 |
On request
|
3.522,09 € with VAT |
| M14-M24 / TC-820 |
On request
|
3.904,92 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000320626
- Brand:
- VERTEX
- Warranty:
- 24 months
- Code:
- 3404-431A
Product information
Range: M14-M24
Speed: 90-100 rpm. / min. (clamping head VAT-SP24)
Shoulder positioning: Rmin. 200mm, Rmax 1900mm
Contains 6 pcs of TC-820 adapters with torque coupling for taps:
DIN376: M14, M16, M18, M20, M22, M24
, other adapters can be purchased - see related products.
Contains air pressure regulator with separator and lubricator.
Clamping cast iron plate not included!
Angle head can be purchased for threading - see related products.
Ref. No. 3404-431A
Variants
Accessories
-
TC-820 / GT-20 tapping adapter for machine taps
Quick release attachment / sleeve / insert / collet TC820 / GT20 with slip for machine taps The attachment clamps taps: DIN 371 (reinforced shank): see attached table DIN 376 (classic shank): see attached table Method of clamping the tap: The taps are secured in the extension by a square and a clamping shank. The tap is firmly held in the extension, it is pulled out after pressing the clamping collar in the front of the extension. Features : The tap is clamped in a suitable collet TC820, which has a torque coupling already preset, or it can be fine-tuned as needed. This insert fits into a thread cutter - see related products. Cannot be used alone.
50,01 € with VAT -
Pneumatic tapping head VAT-SP, VERTEX
Air tapping head / tap Range: according to the chosen variant Size of TC extensions: according to the selected variant Speed: see label for each variant Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). The tap is without tap adapters, available for purchase - see related products
from 463,38 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!