Plugged

Plug-in digger with four blades Diameter: 97.5 mm Other dimensions - see attached catalog sheet Clamping hole: 40mm Material: HSS - high-performance high-speed steel Tolerance: nominal dimension in tolerance h8 for the hole with an allowance for more precise machining. Excavator production method: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) CSN 241210 (DIN 217) holders are used for clamping Usage: Machining pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. Cat. No. : B149750F000S

Plug-in digger with four blades Diameter: 98 H11 Other dimensions - see attached catalog sheet Clamping hole: 40mm Material: HSS - high-performance high-speed steel Tolerance: nominal dimension in tolerance h8 for the hole with an allowance for more precise machining. Excavator production method: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) CSN 241210 (DIN 217) holders are used for clamping Usage: Machining pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. Cat. No. : B149801F000S

Plug-in digger with four blades Diameter: 99.5 mm Other dimensions - see attached catalog sheet Clamping hole: 40mm Material: HSS - high-performance high-speed steel Tolerance: nominal dimension in tolerance h8 for the hole with an allowance for more precise machining. Excavator production method: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) CSN 241210 (DIN 217) holders are used for clamping Usage: Machining pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. Cat. No. : B149950F000S

Plug-in digger with four blades Diameter: 100 H11 Other dimensions - see attached catalog sheet Clamping hole: 40mm Material: HSS - powerful high-speed steel Tolerance: nominal dimension in tolerance h8 for the hole with an allowance for more precise machining. Excavator production method: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) CSN 241210 (DIN 217) holders are used for clamping Usage: Machining pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. Cat. No. : B149991F000S

Holder 13-M3 for socket drill A „A’SN221414 or reamer A„ A’SN221432, A „A’SN221435, A„ A’SN221447 Clamping diameter for reamer / diameter: 13th Cone: morse 3 - MK3 Material: Structural steel - Cemented, hardened Standard: A „A’SN241210 / 24 1210 or DIN 217(ISO 2402) Including A„ A ’ SN241210.10 Usage info: Scanning of countersinks and reamers is performed by a matrix locally Behind the carrier.