Plates

Turning insert VBD WNMG 080408 F3P IC830 Radius 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type F3P: for common and finishing operations during steel machining. Low cutting forces due to the positive sharpness providing very reliable performance and tool life. Contact the Company: Kat. Ä. : 3328803 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD WNMG 060404 M3P IC830 Radio 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328808 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 060408 M3P IC830 Radio 0,8mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328809 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 080404 M3P IC830 Radio 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328811 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 080408 M3P IC830 Radius 0,8mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328812 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-F3S IC806 Radius 0.8mm Coating: PVD - AlTiN "SUMO TEC" Series IC806: Hard series with a special SUMO TEC post-coating surface treatment. Suitable for turning heat-resistant steels and titanium alloys and inconel at low to medium cutting speeds. High resistance to wear and plastic deformation. Usage - universal: Superalloys: S15-S25 Cutting conditions - see attached photo Type F3S: Sharp breaker for finishing operations when machining heat-resistant steels. It shows very good chip formation at a cutting height of 0.5-2.0mm and a feed of 0.1-0.3mm/rev. More - see the attached catalog sheet. Order no. no.: 3340869 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-F3S IC804 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN Series IC804: Hard submicron substrate with PVD SUMOTEC coating. Suitable for machining hard nickel-based steels - e.g. Inconel (40-50HRC) at low to medium speeds. Usage: Refractory steel: S10-S20 Cutting conditions - see attached photo Type F3S: Sharp breaker for finishing operations when machining refractory steels. It shows very good chip formation at a cutting height of 0.5-2.0mm and a feed of 0.1-0.3mm/rev. Order no. no.: 3340982 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

P28477-3 WKP25 Scaffolding is suitable for machining: steel P15-P30, cast iron Cat. No. 04573530787

CNMS 120408 - 12 IC20 Radius 0,8mm Coating: uncoated IC20 Series: Suitable for routine and finishing operations, roughing of aluminum, cast iron and stainless steel. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Standard conditions - see attached photo Typ 12: Single-sided 80 ° plate with very sharp cutting edge for machining soft non-ferrous materials. Kat. No. 5500336

DNMS 150408 - 12 IC20 Radius 0,8mm Coating: uncoated IC20 Series: Suitable for routine and finishing operations, roughing of aluminum, cast iron and stainless steel. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Standard conditions - see attached photo Typ 12: Single-sided 80 ° plate with very sharp cutting edge for machining soft non-ferrous materials. Kat. No. 5500519

VBD RCMT 1204MO - 14 IC20 Turning Tips Radius: 6mm Recessed Head Screw: M5 (T20) Coating: Uncoated IC20 Series: Suitable for common and finishing operations, aluminum, cast iron and stainless steel roughing. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Terms and conditions - see attached photo Typ -14: Suitable for common and finishing operations of soft steel, ideal also for machining of non-traditional alloys Cat. No. 05500620

Turning insert VBD TNMS 160408-12 IC20 Radius 0,8mm Coating: uncoated A IC20 Series: Suitable for routine and finishing operations, roughing of aluminum, cast iron and stainless steel. Applications: Stainless steel: M10-M25 Cast iron: K10-K20 Non-ferrous metals and plastics: N05-N25 Superalloys: S05-S20 Carbides: H05 -H15 Terms - see attached photo Type 12: One-sided 80 ° plate with a very sharp inclination of the blade for turning milling Of non-ferrous materials. Contact the Company: Kat. Ä. : 5501821 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.