Plates

Internal replaceable blade thread insert 16 IR M ISO BMA Size : Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: right Height (to edge) : 3.47mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replaceable cutting edge threaded insert 16 IL M ISO BMA Size: 16 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Height (to edge) : 3.47mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert for hardened steel, replaceable insert, insert DCGW 070204 HRC55 Suitable for holders for DCMT / DCGT inserts. Radius: 0,4mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Turning insert for hardened steel, replaceable insert, insert DCGW 11T304 HRC55 Suitable for holders for DCMT / DCGT inserts. Radius: 0,4mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Turning insert for hardened steel, replaceable insert, insert CCGW 060204 HRC55 Suitable for holders for CCMT / CCGT inserts. Radius: 0,4mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Turning insert for hardened steel, replaceable insert, insert CCGW 09T304 HRC55 Suitable for holders for CCMT / CCGT inserts. Radius: 0,4mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Turning insert for hardened steel, replaceable insert, insert CNGA 120408 HRC55 Suitable for holders for CNMG / CNMM inserts. Radius: 0.8mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Turning insert for hardened steel, replaceable insert, insert WNGA 080408 HRC55 Suitable for holders for WNMG / WNMM inserts. Radius: 0,8mm Material: CBN(3x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Parting insert for hardened steel, replaceable insert, insert MGGN200 CM HRC55 Suitable for up to 2mm holders for Korloy MGMN300 inserts - ie for MGEHR / MGEHL, MGIVR / MGIVL holders Width: 2mm Material: CBN(1x) CBN coating: without coating - Second side universal(steel stainless steel) - suitable for starting the groove HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) - the other side without CBN is suitable for steel and stainless steel Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

Parting insert for hardened steel, replaceable insert, insert MGGN300 CM HRC55 Suitable for up to 3mm holders for Korloy MGMN300 inserts - ie for MGEHR / MGEHL, MGIVR / MGIVL holders Width: 3mm Material: CBN(1x) CBN coating: without coating - Second side universal(steel stainless steel) - suitable for starting the groove HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) - the other side without CBN is suitable for steel and stainless steel Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

External replaceable blade thread insert 22 ER M ISO BMA Size: 22 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: right Height (to edge): 4.71mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

External replaceable blade thread insert 22 EL M ISO BMA Size: 22 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: left Height (to edge): 4.71mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.