Plates

Lathe insert VBD KNUX 160405 - 11, PK25 Radius: 0,5mm Coating: MT-TiCN, Al2O3 TiN < br> Series PK25: Excellent wear resistance and rigidity. Ideal for conventional machining / roughing of conventional steels and steel alloys. Application: Steel: P15-P30 Cast iron:(K10-K20) Cutting conditions: Vc = 120-220 m / min fn = 0.20-0.35 mm / rev. ap = 1,0-6,0 mm Type 11: Roughing breaker for machining common steels, stainless steels and cast steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD KNUX 160405 - 11, MP30 Radius: 0,5mm Coating: PVD, TiCN TiN MP30 Series: High wear resistance, suitable for intermittent cutting, ideal for stainless steel. Application: Steel:(P20-P40) Stainless steel: M15-M35 Cutting conditions: Vc = 80-160 m / min fn = 0.20-0.35 mm / rev. ap = 1,0-6,0 mm Type 11: Roughing breaker for machining common steels, stainless steels and cast steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 060204 - MF MP20 Radius: 0,4mm Coating: TiAlN, PVD MP20 series: Substrate on a super micrograin base, high rigidity, very low adhesion of machined material. Ideal for machining stainless and conventional steels. Application: Steel: P15-P25 Stainless steel: M15-M25 Cast iron: K05-K10 Cutting conditions: Vc = 100 - 210 m / min fn = 0.06-0.17 mm / rev. ap = 0,2-2,4 mm Type MF: Special breaker with a sharp beige item preventing the chips from sticking. Suitable for normal machining and finishing - classic steel and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 09T304 - MF MP20 Radius: 0,4mm Coating: TiAlN, PVD MP20 series: Substrate on a super micrograin basis, high rigidity, very low adhesion of machined material. Ideal for machining stainless and conventional steels. Application: Steel: P15-P25 Stainless steel: M15-M25 Cast iron: K05-K10 Cutting conditions: Vc = 150 -270 m / min fn = 0.08-0.23 mm / rev. ap = 0,3-3,0 mm Type MF: Special breaker with a sharp beige item preventing the chips from sticking. Suitable for normal machining and finishing - classic steel and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable blade thread insert TN 08ILA60 / TN 08ERA60 - universal 60° Size: 08 Pitch: 0.5 - 1.5 mm Apical angle: 60° Suitable for cutting internal metric threads, pitch 0.5 - 1.5 mm Can also be used for cutting external metric threads, pitch 0.5 - 1.5 mm (to holders for inserts 08 ER) Coating: PVD submicron TiN Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replaceable cutting edge threaded insert TN 08 IR 1.0 M ISO BMA Size: 08 Rise: 1.0 mm Apex angle: 60° Suitable for cutting internal metric threads, pitch 1.0 mm Can also be used to cut external metric threads, pitch 1.0 mm (for holders for 08 EL inserts) Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replaceable cutting edge threaded insert TN 08 IR 1.25 M ISO BMA Size: 08 Pitch: 1.25 mm Apex angle: 60° Suitable for cutting internal metric threads, pitch 1.25 mm Can also be used to cut external metric threads, pitch 1.25 mm (for holders for 08 EL inserts) Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replaceable cutting edge threaded insert TN 08 IR 1.5 M ISO BMA Size: 08 Rise: 1.5 mm Peak angle: 60° Suitable for cutting internal metric threads, pitch 1.5 mm Can also be used to cut external metric threads, pitch 1.5 mm (for holders for 08 EL inserts) Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 08U IR/L 2 TR Inserts for cutting trapezoidal threads with a pitch of 2 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

TCGX 110204L-WK - suitable replacement for TCGT CERMET < br> 5015 Series: Suitable for finishing operations, high stiffness. Ideal for low carbon alloys, both dry and wet, at low and high engine speeds. Usage: Steel: P01-P20 Cast iron: K01-K10 Terms and conditions - see attached photo WK type: Order no. : 11196625

External exchangeable cutting insert 11 ER 1.25 M ISO BMA Size: 11 Pitch: 1.25 mm Height Â!Ka(after running): 3,47mm Suitable for cutting external metric thread, pitch M 1,25mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high Cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel(Ni, Co , Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). Contact the Company: Cat. A „. : The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

External replaceable insert 11 ER 1.25 M ISO MXC Size: 11 Pitch: 1.25 mm Tip angle: 60° Height(po edge): 3.47mm Suitable for cutting metric external thread, pitch M 1.25mm Coating: PVD submicron TiN Blade material: MXC Application: Steel - Stainless steel - Cast iron - Non-ferrous metals - Heat-resistant steel - Hardened steel Cutting conditions see enclosed catalog, page no. 56(sheet no. 60). Contact the Company: Kat. No.: The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.