Plates

Turning insert VBD CCMT 09T308 WG IC8250 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiCN TiN < b> Series IC8250: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type WG : Suitable for high-feed machining, where a very smooth surface can be achieved. Ord. Ä. : 5550222 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408 WG IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 General conditions - see attachment © photo Type WG: Wiper series - high-speed machining - fast feed - with very good quality of the resulting surface. Contact the Company: Kat. Ä. : 5550247 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-WG IC8250 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type WG : Suitable for high-feed machining, where a very smooth surface can be achieved. Ord. Ä. : 5550249 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD DCMT 070201 - PF IC807 Radius 0,1mm Coating: TiAlN, PVD IC807 Series: < br> A solid sub-micron substrate. Suitable for low to medium cutting speeds. Developed for machining refractory steels, austenitic stainless steels and very hard steels. Usage - Universal: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K10-K30 Superslitz: S05-S20 H05-H15 Standard conditions - see enclosed photo PF type: Suitable for common and finishing operations of common steels and non-traditional alloys Ref. No. 5550297

Turning insert VBD DCMT 11T308 - 14 IC5005 Radius 0,8mm Up. hole - diameter: 4,4mm Coating: CVD, TiCN Al2O3 TiN IC5005 Series: Hard Multilayer Substrates MTCVD TiCN coating and a thick layer of Al2O3 coating with a post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 General conditions - see attachment © photo Type 14: Suitable for common and finishing operations on mild steels, also ideal for machining non-traditional alloys Cat. Ä. : 5550305 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD DNMG 150404 TF IC807 Radius 0.4mm Insert height: 4.76mm Coating: PVD, TiAlN IC807 series: Solid sub-micron substrate. Suitable for low to medium cutting speeds. Developed for machining heat-resistant steels, austenitic stainless steels and very hard steels. Use - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K10-K30 Superalloys: S05-S20 Carbide: H05-H15 Cutting conditions - see attached photo Type TF: Universal use in normal cutting conditions. Suitable for carbon and alloy steels and refractory alloys Cat. no.: 5550322 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

DNMG 150604 NF IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 Types of NF: Suitable for common and finishing operation. Kat. No. 5550328

Turning insert VBD TCMT 110202 PF IC807 Radius 0,4mm Coating: TiAlN, PVD A IC807 Series: Rigid sub-micron substrate. Suitable for low to medium cutting speeds. Developed for machining heat-resistant steels, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K10-K30 Superalloys: S05-S20 Carbides: H05 -H15 General conditions - see attached photo Type PF: Suitable for finishing operations of common steels and non-traditional alloys. Contact the Company: Kat. Ä. : 5550443 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD TCMT 16T308-19 IC5005 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN Series IC5005: Hard substrate with multi-layer MTCVD TiCN coating and a thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast iron) at medium to high cutting speeds under stable or slightly unstable conditions. It is used when there is a higher requirement for wear resistance than IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Cutting conditions - see attached photo Type -19 : Sharp 7° breaker for roughing operations with medium to large chip removal. Cat. no.: 5550451 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD WNMG 060404 WG - Wiper IC8150 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8150 Series: < / b> Hard substrate with enriched cobalt layer, MTCVD TiCN and alpha Al2O3 CVD coating. Excellent thermal stability and resistance to peeling and plastic deformation. It is recommended for high-speed machining of steels under stable conditions. Application: Steel: P01-P30 Cast iron: K05-K15 General conditions - see attached photo WG Type: Suitable for machining with large with a very smooth surface. Ref. : 5550530

VBD WNMG 080408 NR IC5010 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN IC5010 Series: Plates have a very hard substrate (base), ideal for machining gray and ductile cast iron under stable or slightly unstable conditions - unbroken or slightly interrupted cut -> finishing operations. Application - roughing: Cast iron: K10-K25 Standard conditions - see attached photo Typ NR: Special grinder for roughing. Kat. No .: 5550537

VBD DCMT 11T308 F3P IC8150 Coating: CVD, TiCN Al2O3 TiCN TiN IC8150 Series: Hard substrate with enriched cobalt layer, MTCVD TiCN and alpha Al2O3 CVD coating. Excellent thermal stability and resistance to peeling and plastic deformation. It is recommended for high-speed machining of steels under stable conditions. Application: Steel: P01-P30 Cast iron: K05-K15 Standard conditions - see attached photo F3P type: for normal and finishing operations in the machining of steels. Low cutting forces thanks to a positive blade providing very reliable performance and tool life. Ref. : 5566870