Permanent magnetic plate 700mm, Alustar
| 200mm |
On request
|
1.734,08 € with VAT |
| 250mm |
On request
|
1.899,75 € with VAT |
| 300mm |
On request
|
2.147,54 € with VAT |
| 350mm |
On request
|
2.733,08 € with VAT |
| 400mm |
On request
|
3.710,57 € with VAT |
| 500mm |
On request
|
4.719,24 € with VAT |
| 600mm |
On request
|
6.689,16 € with VAT |
| 700mm |
On request
|
8.373,96 € with VAT |
| 800mm |
On request
|
11.657,75 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000469400
- Brand:
- ČR
- Warranty:
- 24 months
- Code:
- ALUS30D700
Product information
Magnet diameter: 700mm
Magnet height: 120mm
Other dimensions - see attached data sheet.
Nominal clamping force: 140N / cm2
Minimum workpiece diameter: 40mm
Magnet regrinding limit: 5 mm
High-performance double neodymium magnetic system, aluminum base.
Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece.
The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces.
Very safe, self-locking mechanism that prevents the chuck from turning off during machining.
Countersinks and threads from the underside of the base for clamping on a suitable flange.
You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces.
Application: turning, round grinding
The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets.
The big advantage of the clamp is the patented switching mechanism, whic
Variants
Accessories
-
Lamellar block(2pcs) for magnetic clamps 50x25x100mm, VCP-1
Lamel Magnetic Block Polar Pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 50mm Height: 25mm Lenght: 100mm Lamellar Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to the classical surface of a magnetic clamping plate . It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-401
In stock62,40 € with VAT -
Lamellar prismatic block(2pcs) for magnetic clamps 58x45x51mm, VCP-2
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 58mm Height: 45mm Lenght: 51mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to their classical surface by a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-402
In stock62,28 € with VAT -
Lamellar prismatic block for magnetic clamps 60x48x110mm VCP-3
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-403
In stock70,33 € with VAT -
Set of lamella blocks for magnetic clamps, VCP-6
Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410
In stock256,17 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!