Permanent magnetic plate 300mm, Maxgrip
Product information
Diameter of the magnet: 300mm
Height of the magnet: 57mm
Other dimensions - see the attached catalog sheet.
Nominal clamping force: 160N/cm2
Minimum workpiece diameter: 40 x 8 mm
Magnet regrind limit: 10 mm
Pole spacing: 11 mm steel, 4 mm epoxy
Very powerful double neodymium magnet system, steel base.
Unique construction with a screw self-locking switching mechanism for smooth adjustment of the clamping force, which facilitates the centering of the workpiece.
Very safe, self-locking mechanism preventing the clamp from turning off during machining.
Recesses and threads from the underside of the base for clamping to a suitable flange.
Usage: turning, round grinding
The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets.
A big advantage of the clamp is the patented switching mechanism, which allows you to variably set the clamping force and firmly fixes the set clamping force in any position. Thanks to the switching mechanism, you can turn on the clamp at 10 to 20% of the force, easily center the workpiece, switch to 100% and proceed to a safe operation.
Cat.No. : MAXG300
If you are not sure about the choice - you do not know which magnet is suitable for your work, contact us, we will be happy to help!
Accessories
-
Set of lamella blocks for magnetic clamps, VCP-6
Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410
In stock255,87 € with VAT -
Lamellar prismatic block(2pcs) for magnetic clamps 58x45x51mm, VCP-2
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 58mm Height: 45mm Lenght: 51mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to their classical surface by a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-402
In stock62,21 € with VAT -
Lamellar prismatic block for magnetic clamps 60x48x110mm VCP-3
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-403
In stock70,24 € with VAT -
Lamellar block(2pcs) for magnetic clamps 50x25x100mm, VCP-1
Lamel Magnetic Block Polar Pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 50mm Height: 25mm Lenght: 100mm Lamellar Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to the classical surface of a magnetic clamping plate . It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-401
In stock62,33 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!