Permanent magnetic clamp 350x150 mm for milling 160N/cm2, Neomill
| 250x150mm |
In stock
(1x)
|
860,39 € with VAT |
| 300x150mm |
On request
|
1.045,26 € with VAT |
| 300x200mm |
On request
|
1.278,97 € with VAT |
| 300x300mm |
On request
|
1.652,29 € with VAT |
| 350x150mm |
On request
|
1.214,60 € with VAT |
| 400x200mm |
On request
|
1.450,46 € with VAT |
| 400x250mm |
On request
|
1.769,50 € with VAT |
| 400x300mm |
On request
|
2.028,24 € with VAT |
| 400x400mm |
On request
|
2.338,25 € with VAT |
| 450x150mm |
In stock
(1x)
|
1.323,69 € with VAT |
| 450x200mm |
On request
|
1.631,03 € with VAT |
| 500x200mm |
On request
|
1.657,00 € with VAT |
| 500x250mm |
On request
|
1.923,91 € with VAT |
| 500x300mm |
On request
|
2.270,54 € with VAT |
| 600x200mm |
On request
|
2.053,37 € with VAT |
| 600x250mm |
On request
|
2.027,57 € with VAT |
| 600x300mm |
On request
|
2.522,83 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000483406
- Brand:
- ČR
- Warranty:
- 24 months
- Code:
- NEOM150350
Product information
Magnet width: 150mm
Magnet length: 350mm
Magnet height: 55mm
Nominal clamping force: 160N/cm2 - suitable for milling
Pole distance: Steel 11mm brass 4mm
Clamping surface with even distribution of magnetic force to the edges!!!
Minimum workpiece size: 25x25x6 mm
Magnet regrinding limit: 6 mm
The (base) body is made of durable and strong material, the pole plate is made of one piece of steel. Anywhere on the pole board, it is thus possible to mill pockets and other auxiliary modifications for series production, without loosening or disintegrating the lamellar board.
Usage - universal: milling, drilling, planing, power sanding.
Package includes: Clamp, stop bars, toggle key and user manual.
The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets.
Cat. no. : NEOM150350
We are able to customize the magnets to order - e.g. :
- Finish the longitudinal grooves for clamping the magnet
- Finish the guide grooves for the guide stones
- Cut the threads for vice fixing
- Mill T-slots for T-nuts
- Adjust stops
- Mill beds for series production
- all according to your requirements
If you you are not sure about the choice - you do not know which magnet is suitable for your work, contact us, we will be happy to help!
Variants
Accessories
-
Lamellar block(2pcs) for magnetic clamps 50x25x100mm, VCP-1
Lamel Magnetic Block Polar Pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 50mm Height: 25mm Lenght: 100mm Lamellar Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to the classical surface of a magnetic clamping plate . It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-401
In stock62,39 € with VAT -
Lamellar prismatic block(2pcs) for magnetic clamps 58x45x51mm, VCP-2
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 58mm Height: 45mm Lenght: 51mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to their classical surface by a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-402
In stock62,27 € with VAT -
Set of lamella blocks for magnetic clamps, VCP-6
Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410
In stock256,12 € with VAT -
Lamellar prismatic block for magnetic clamps 60x48x110mm VCP-3
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-403
In stock70,31 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!