Permanent magnetic chuck 70x140 mm for flat grinding 100N / cm2, Neomicro
| 140x70mm |
On request
|
792,36 € with VAT |
| 150x150mm |
On request
|
841,39 € with VAT |
| 175x100mm |
In stock
(1x)
|
742,42 € with VAT |
| 200x100mm |
On request
|
862,40 € with VAT |
| 250x100mm |
In stock
(2x)
|
808,38 € with VAT |
| 250x150mm |
In stock
(1x)
|
852,89 € with VAT |
| 255x130mm |
In stock
(1x)
|
930,55 € with VAT |
| 300x150mm |
In stock
(1x)
|
892,52 € with VAT |
| 350x150mm |
In stock
(1x)
|
920,42 € with VAT |
| 400x150mm |
On request
|
1.102,08 € with VAT |
| 400x200mm |
In stock
(1x)
|
1.081,89 € with VAT |
| 450x150mm |
In stock
(1x)
|
1.086,93 € with VAT |
| 450x200mm |
On request
|
1.555,68 € with VAT |
| 500x200mm |
On request
|
1.649,63 € with VAT |
| 500x250mm |
On request
|
1.900,23 € with VAT |
| 500x300mm |
On request
|
2.447,30 € with VAT |
| 600x200mm |
On request
|
1.814,82 € with VAT |
| 600x300mm |
On request
|
2.865,49 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000431629
- Brand:
- ČR
- Warranty:
- 24 months
- Code:
- NEOC070140
Product information
Magnet width: 70mm
Magnet length: 140mm
Magnet height: 49mm
Nominal clamping force: 100N / cm2 - suitable for grinding Surface mounting
Distance between poles: Steel 1,4mm, brass 0,5mm
Clamping surface with even distribution of magnetic force up to the edges !!!
Minimum workpiece size: 4x4x1 mm
Regrinding limit of the magnet: 7 mm
This magnet is ideal for precise grinding of small, thin even large parts and also for electroerosive machining. Thanks to the waterproof construction, it is possible to use coolant or immerse it in a dielectric fluid. The upper saw plate is composed of brass and steel slats, high stability, accuracy and clamping efficiency is guaranteed by the maximum concentration of magnetic force in the workpiece surface.
Use: surface grinding, EDM electroerosive machining.
Package includes: clamp, stop rail You, a set of clamps, a switch key
The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and warranty service for the magnets. Contact the Company: Kat.A „. : NEOC70140
We are able to customize the magnets in any way - for example. :
* Supply longitudinal grooves for clamping magnets
* Supply guide grooves for guide stones
* Cut threads for fixing lights
Milling T-slots for T-nuts
* Adjusting stops
* Milling beds for series production
- all according to your requirements!Their requirements
If you are unsure of your choice - you do
Variants
Accessories
-
Lamellar block(2pcs) for magnetic clamps 50x25x100mm, VCP-1
Lamel Magnetic Block Polar Pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 50mm Height: 25mm Lenght: 100mm Lamellar Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to the classical surface of a magnetic clamping plate . It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-401
In stock62,40 € with VAT -
Set of lamella blocks for magnetic clamps, VCP-6
Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410
In stock256,17 € with VAT -
Lamellar prismatic block(2pcs) for magnetic clamps 58x45x51mm, VCP-2
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 58mm Height: 45mm Lenght: 51mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to their classical surface by a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-402
In stock62,28 € with VAT -
Lamellar prismatic block for magnetic clamps 60x48x110mm VCP-3
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-403
In stock70,33 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!