Permanent magnetic chuck 200x500 mm for milling 160N / cm2, Neomill Compact
| 250x150mm |
In stock
(3x)
|
688,39 € with VAT |
| 450x150mm |
On request
|
1.203,55 € with VAT |
| 400x200mm |
In stock
(2x)
|
1.160,56 € with VAT |
| 500x200mm |
On request
|
1.506,64 € with VAT |
| 600x200mm |
On request
|
1.843,60 € with VAT |
| 400x250mm |
On request
|
1.608,95 € with VAT |
| 500x300mm |
On request
|
2.064,59 € with VAT |
| 600x300mm |
In stock
(2x)
|
2.018,70 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000431834
- Brand:
- ČR
- Warranty:
- 24 months
- Code:
- NEOMC200500
Product information
Magnet width: 200mm
Magnet length: 500mm
Magnet height: 55mm
Nominal clamping force: 160N / cm2 - suitable for fr. Binding
Distance between poles: Steel 11mm, Epoxy(optional brass) 4mm
Clamping surface with even distribution of magnetic force up to the edges !!!
Minimum workpiece size: 25x25x6 mm
Magnet regrinding limit: 10 mm
The body(base) is made of durable and strong material, the saw blade is made of one piece of steel. It is thus possible to cut pockets and other auxiliary adjustments for series production anywhere on the saw board without loosening or disintegration of the lamella board.
Application - universal: milling, drilling, planing, power grinding.
Components The package is: Clamp, stop rails, change-over wrench and operating instructions.
The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and warranty service for the magnets. Contact the Company: Kat.A „. : NEOMC200500
We are able to customize the magnets in any way - for example. :
* Supply longitudinal grooves for clamping magnets
* Supply guide grooves for guide stones
* Cut threads for fixing lights
Milling T-slots for T-nuts
* Adjusting stops
* Milling beds for series production
- all according to your requirements!Their requirements
If you are unsure of your choice - you do not know which magnet is suitable for your work , contact us, we w
Variants
Accessories
-
Lamellar prismatic block for magnetic clamps 60x48x110mm VCP-3
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-403
In stock70,33 € with VAT -
Lamellar prismatic block(2pcs) for magnetic clamps 58x45x51mm, VCP-2
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 58mm Height: 45mm Lenght: 51mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to their classical surface by a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-402
In stock62,28 € with VAT -
Set of lamella blocks for magnetic clamps, VCP-6
Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410
In stock256,17 € with VAT -
Lamellar block(2pcs) for magnetic clamps 50x25x100mm, VCP-1
Lamel Magnetic Block Polar Pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 50mm Height: 25mm Lenght: 100mm Lamellar Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to the classical surface of a magnetic clamping plate . It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-401
In stock62,40 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!