PCMNN 3232 P12C, AKKO lathe knife

Lathe insert VBD CNMG 120404 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.50 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - HM PC5300 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40( hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 HM breaker: Suitable for common gears Â!R , intermittent and intermittent cutting. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, insert, insert CNMG 120404 - HM NC3030 Radius 0.4 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC3030 - Suitable for machining steels at medium to low speeds. Excellent wear resistance, chipping and high temperature stability due to Al2O3 coating. Excellent stability under various grip conditions. Coating: MT-CVD: TiCN TiC Al2O3 TiN Application: Steel: P25-P35 Stainless steel: M15-M25 Recommended feed: see attached PDF file or photo LamaÄ HM: Suitable for normal machining, for uninterrupted and interrupted ovanA1 A ™ ez. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - B25 PC5300, KORLOY Radius 0.8mm Length A ™ Cutting edges: 12.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 < br> Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker B25: Smooth universal breaker for normal machining. Long continuous chip. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120404 - B25 PC5300, KORLOY Radius 0.4mm Length A ™ Cutting edges: 12.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 < br> Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker B25: Smooth universal breaker for normal machining. Long continuous chip. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408 GN IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5509498 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD SNMG 120408E-R; 6630 Radius 0,8mm Slices design suitable for machining: steel, stainless steel, cast iron Material of the blade: 6630 Usage: Steel: P15-P35 Stainless Steel: M10-M30 Cast Iron: K20-K30 | code: 80000011

Turning insert VBD CNMG 120408 GN IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Application: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Special conditions - see appendix © photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5507730 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408 WG IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 General conditions - see attachment © photo Type WG: Wiper series - high-speed machining - fast feed - with very good quality of the resulting surface. Contact the Company: Kat. Ä. : 5550247 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CNMG 120408 PP IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - Universal: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Non Ferrous Metals & Plastics: N05-N20 Superslitz: S05-S20 Hardnesses: H05-H15 Conditions of use - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5591047

Turning insert VBD CNMG 120404 TF IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 5567678 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404 TF IC907 Radius 0,4mm Coating: PVD, TiAlN TiN IC907 Series: Hard sub-micron substrates TiAlN PVD coated. Suitable for low to medium cutting speeds. Developed for machining heat-resistant alloys, titanium, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20(not recommended it is suitable, more suitable type is CCGT -AS IC20) Superalloys: S05-S20 Carbides: H05-H15 Other conditions - see attached foto Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 5592199 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CNMG 120408 PP IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - Universal: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Non Ferrous Metals & Plastics: N05-N20 Superslitz: S05-S20 Hardnesses: H05-H15 Conditions of use - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5591047

VBD CNMG 120408 TF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Superslitin: S05-S20 Hardened: H05-H15 TF: Universal use under normal cutting conditions . Kat. No .: 5598518