Parting

Parting insert for hardened steel, replaceable insert, insert MGGN200 CM HRC55 Suitable for up to 2mm holders for Korloy MGMN300 inserts - ie for MGEHR / MGEHL, MGIVR / MGIVL holders Width: 2mm Material: CBN(1x) CBN coating: without coating - Second side universal(steel stainless steel) - suitable for starting the groove HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) - the other side without CBN is suitable for steel and stainless steel Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

Parting insert for hardened steel, replaceable insert, insert MGGN300 CM HRC55 Suitable for up to 3mm holders for Korloy MGMN300 inserts - ie for MGEHR / MGEHL, MGIVR / MGIVL holders Width: 3mm Material: CBN(1x) CBN coating: without coating - Second side universal(steel stainless steel) - suitable for starting the groove HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) - the other side without CBN is suitable for steel and stainless steel Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

Turning insert, VBD - 5 mm Recess width: 5mm Plate length: 19,0 mm Plate height: 6,1 mm Coating: TiCN (Titanium Carbon Nitride) IC354 Series: Thin PVD TiCN Carbon Film P40. High hardness. Suitable for common use - cutting, grooving steels, alloys and stainless steels under normal to high engagement conditions. Application: Steel: P20-P40 Stainless Steel: M10-M30 6200088

Turning insert insert, VBD - 4 mm Recess width: 4mm Plate length: 19,0 mm Plate height: 4,75 mm Coating: TiCN (Titanium Carbon Nitride) IC354 Series: Thin PVD TiCN Carbon Film P40. High hardness. Suitable for common use - cutting, grooving steels, alloys and stainless steels under normal to high engagement conditions. Application: Steel: P20-P40 Stainless Steel: M10-M30 6200123

Turning parting insert, replaceable insert, insert - 3 mm Groove width: 3mm Insert length: 16.0 mm Plate height: mm Coating: TiCN(Titanium Carbon Nitride) IC808 Series: Hard carbide with fine grain structure with excellent resistance to chipping. High resistance to wear and tear. Suitable for universal use. Application: Steel: P15-P30 Stainless steel: M20-M30 Cast iron: K20-K40 Non-ferrous metals and plastics : H10- H20 Heat-resistant steels: S10-S25 Suitable for indoor and outdoor grooves | 6200318 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vibrating cutting insert, VBD - 5 mm Recess width: 5mm Plate length: 19,0 mm Plate height: 6,1 mm Coating: PVD: TiAlN / AlTin TiN IC808 Series: Hard Carbide with fine grain structure with excellent embossing resistance. High resistance to wear. Suitable for universal use. Application: Steel: P15-P30 Stainless: M20-M30 Cast iron: K20-K40 Non-ferrous metals and plastics: H10-H20 Heat-resistant steel: S10-S25 Suitable for internal and external recesses 6200327

Turning insert, insertable, VBD LFUX030802TN; 6640 Recess width: 3mm Application: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Superslitins (Ni, Co, Fe, Ti): S20-S30 80001592

Turning insert, insertable, VBD LFUX040802TN; 6640 Recess width: 4mm Application: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Superslitins (Ni, Co, Fe, Ti): S20-S30 The price is for 1 piece, not for the whole package (10pcs)

Turning insert cutting insert, VBD LFUX050802TN; 6640 Recess width: 5mm Application: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Superslitins (Ni, Co, Fe, Ti): S20-S30 The price is for 1 piece, not for the whole package (10pcs)

Left Turning Edge Cutter, Changeable Slice, VBD LFUX030800TL; 6640 Recess Width: 3mm Left Edge Geometry. Usage: Steel: P20-P40 Stainless Steel: M20-M35 Cast Iron: K25-K40 Superslitin (Ni, Co , Fe, Ti): S20-S30 The price is for 1 piece, not for the whole package (10pcs)

Right turning insert, insert, VBD LFUX030800TR; 6640 Recess width: 3mm Right cutting edge geometry. Usage: Steel: P20-P40 Stainless Steel: M20-M35 Cast Iron: K25-K40 Superslitin (Ni, Co , Fe, Ti): S20-S30 The price is for 1 piece, not for the whole package (10pcs)

Right turning insert cutting insert, VBD LFUX040800TR; 6640 Recess width: 4mm Right cutting edge geometry. Usage: Steel: P20-P40 Stainless Steel: M20-M35 Cast Iron: K25-K40 Superslitin (Ni, Co , Fe, Ti): S20-S30 The price is for 1 piece, not for the whole package (10pcs)