Orchard

Hand tap W Climb: basic Fitting: medium Material: NO - Tool Steel PN 8/3011 NO taps are suitable for thread stretching or for piece thread cutting.

Hand tap W Climb: basic Fitting: medium Material: HSS - High speed steel PN 8/3011 HSS taps are suitable for cutting threads in common steels (up to 800MPa)

Whitworth hand taps Thread type: W / BSW (British Standard Whitworth) - British inch thread Material: Tool steel Tool steel taps are suitable for thread drawing or for thread cutting. From excess stock - Zbrojovka, Škoda, Narex, etc. Unused or slightly used.

Hand tap W Thread type: English inch whitworth thread Climb: basic Fitting: medium Material: HSS - High speed steel Standard: DIN 352, BS 84 HSS taps are suitable for tapping common steels (up to 800MPa)

BSF hand tap Thread type: British Standard whitworth Fine Climb: basic Fitting: medium Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 900MPa)

Hand tap BA Thread type: British Association - model thread Thread apex angle: 47.5 °, rounded top and bottom of the thread Fitting: medium Material: HSS - High speed steel Standard: BA93, ISO529 HSS taps are suitable for tapping common steels (up to 900MPa)

Hand tap W 1 " Gradient: 8 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable thread threading or piece thread cutting.

Hand tap W 1/2 " HSS They are suitable for threading or thread cutting.

Hand tap W 3/32 " HSS They are suitable for threading or thread cutting.

Hand tap W 3/4 " HSS They are suitable for threading or thread cutting.

Hand Tap W 5/16 " 8/3011 - They are suitable for threading or thread cutting.

Hand Tap W 5/32 " Gradient: 32 Strokes per Inch, Basic Face: Medium Material: NO - Tool Steel - PN 8/3011 Hinges of NO they are suitable for threading or thread cutting. For example, PC screws