Oleje a tuky

Brunox Turbo-Spray power 100 ml is an essential aid in long-term maintenance, where it lubricates, cleans, loosens screws and prevents corrosion. The lubricant also absorbs water. 5in1: * Lubricant * Corrosion protection * Contact spray * Solvent solvents * Service spray Doesn't dry out like other commercially available WD lubricants. Contains higher and higher quality content of the lubricating component. Highly flammable.

Protective agent for stabilization - corrosion protection with extra long-term effect. Strongly holding, hardening. It dries after 1-2 hours, hardens after 12 hours. Heat resistance up to 80A ‚Â ° C Repels moisture and salt water Use and action: * As protection against corrosion during storage outdoors or sea transport. * For shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, equipment eho kind. * Suitable where chrome plating, galvanizing, etc. are not possible. It is applied on a clean dry surface, if the surface is a bit damp, we recommend use Brunox Turbo Spray beforehand - spray it into all cavities and corners so that the moisture disappears. Any water will drop into drops, then wipe the set with a cloth and apply IX 100. The applied layer should be at least 20um thick. The ideal is a dry layer of 50um, which you will achieve when applying 125um of IX100(even at a consumption of 0.63l / m2). Disposal of preparation IX 100: With varnish or cleaning gasoline or with the help of a high-pressure cleaner and a solution from surfactants.

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < br>

Paste cutting, thread cutting, boring and boring operations Special high performance water-soluble paste Application on tool: - in undiluted state - to be diluted up to 1: 4 with water < Packaging 300g

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < br> Packing 1000g

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < Packaging: 30l barrel

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < br> Packing 5000g

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Package: 200ml in plastic container(non-original packaging)

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Packaging: 0.5 liter in a plastic container(non-original packaging)

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Packaging: 1 liter in plastic container(non-original packaging)

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Packaging: 5 liters in plastic container(original packaging)

Cutting oil with a wide range of use, especially for machining on automatic lathes. Its formulation is designed more for tools made of high-speed steel, machining easily machinable light alloy steels and non-ferrous metals, including copper. It also handles more complex machining operations in these materials. When machining copper, the machined surface does not darken. Lubex CUT are petroleum oils that contain additives to improve the cutting and lubricating effect, reduce the formation of oil mist and protect machines, tools and workpieces from corrosion. Usage: Lubex CUT 22, 32, 32 A, 46 are intended for chip machining operations with precisely definable tool edge geometry (turning, milling, drilling, dividing material, threading and reaming, they also handle internal stretching operations, but only in material with good machinability). The properties of Lubex CUT 22 cutting oil can also be used in operations performed with tools where the geometry of the edge is not precisely defined(grinding threads and teeth). Lubex CUT 46 is an oil formulated for more demanding machining operations(gear milling, broaching and deep drilling).