NC 32mm tap for TC-312 collets with length compensation ST32-WF12
| M3-M12 / 20mm |
In stock
(3x)
|
191,06 € with VAT |
| M3-M12 / 32mm |
In stock
(1x)
|
176,12 € with VAT |
| M8-M20 / 20mm |
In stock
(3x)
|
221,35 € with VAT |
| M14-M33 / 32mm |
In stock
(1x)
|
106,35 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000291834
- Brand:
- VERTEX
- Warranty:
- 24 months
- Code:
- 3404-088
Product information
Screw clamping range: M1 - M16 (need to buy TC312 collet)
Clamping shank: 32mm, cylindrical < Clamping Shank Length: 70mm
Tape Clamping Method:
Taps are clamped into the TC312 clamps, which need to be purchased separately.
The taps are secured in a collet by a square and a clamping shank.
The tap is held firmly in the collet, pulling out after the clamping collar is depressed.
The colts are secured in the head through the bearing and stones.
It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us.
About 90% of the domestic market consists of taps made according to DIN371,374,376
TC312 clamping bits are not part of a thread cutter - they need to be purchased separately! </ u> <
Function:
The tap is clamped into a suitable TC312 collet which has a pre-set torque clutch or can be fine-tuned as needed.
Screwdriver has a length compensation of approx. 0.5cm, so it is sufficient to programmatically adjust the cutting depth. The torque clutch eventually prevents the tilting of the tap.
Variants
Accessories
-
TC-312 / GT-12 tapping adapter for machine taps
Quick release attachment / sleeve / insert / collet TC312 / GT12 with slip for machine taps The attachment clamps taps: DIN 371 (reinforced shank): see attached table DIN 376 (classic shank): see attached table Dimensions of the clamping part (insertion into the clamp - see 2nd photo) - the radius stones are 10mm wide, 4mm high and the wall thickness is 3mm. Method of clamping the tap: The taps are secured in the extension by a square and a clamping shank. The tap is firmly held in the extension, it is pulled out after pressing the clamping collar in the front of the extension. Features : The tap is clamped in a suitable collet TC312, which has a torque coupling already preset, or it can be fine-tuned as needed. This insert fits into a thread cutter - see related products. Cannot be used alone.
from 34,21 € with VAT -
Round die adapter TC-312/TC-820
Quick release attachment / sleeve / insert / collet for circular jaw / threaded eye The attachment clamps round jaws with an outer diameter: according to the selected variant Insert size: according to the selected variant Other dimensions - see product description for individual variants Dimensions of inserts: TC-312: radius stones are 10mm wide, 4mm high and wall thickness is 3mm. Outer / inner diameter of stones: 25.4mm / 19mm. TC-820: radius stones are 11mm wide, 5mm high and wall thickness is 4mm. Outer / inner diameter of stones: 39.5mm / 31mm. This insert fits into a thread cutter - see related products. We do not recommend using it alone.
from 35,36 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!