NC 32mm tap for TC-1433 collets with length compensation, ST32-WF33
| M3-M12 / 20mm |
On request
|
191,59 € with VAT |
|
In stock
(30x)
|
26,12 € with VAT | |
| M3-M12 / 32mm |
In stock
(1x)
|
176,60 € with VAT |
| M8-M20 / 20mm |
In stock
(3x)
|
221,95 € with VAT |
| M14-M33 / 32mm |
In stock
(1x)
|
106,65 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000462968
- Brand:
- -
- Warranty:
- 24 months
- Code:
- 3404-092
Product information
Tapping range: M14 - M33( need to purchase additional collets TC1433)
Clamping shank: 32mm, cylindrical
Clamping shank length: 100mm
Tap clamping method:
The taps are clamped in TC1433 collets, which must be purchased separately.
The taps are secured in the collet with a square and a clamping shank.
The tap is held firmly in the collet, pulled out after pressing the clamping collar.
The collets are secured in the head over a bearing and stones.
In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country.
Approximately 90% of the domestic market consists of taps manufactured according to DIN374, DIN376 standards
TC1433 collets are not part of the tap - they need to be purchased separately! br>
Function:
The tap is clamped in a suitable TC1433 collet, which has a torque clutch already preset, or it can be fine-tuned as needed.
The tap has a length compensation of approx. 1.0 cm, so it is enough to set the cutting depth in a suitable way. The torque coupling may prevent the tap from breaking.
Variants
Accessories
-
TC-1433 / GT-33 tapping adapter for machine taps
Quick clamping attachment / sleeve / insert / collet TC1433 with slip for machine taps Attachment clamps taps: DIN 371 (reinforced shank): see attached table DIN 376 (classic shank): see attached table Tap clamping method: The taps are secured in the extension with a square and a clamping shank. The tap holds firmly in the bit, pulling out after pressing the clamping collar in the front of the bit. Features: The tap is clamped in a suitable TC1433 collet, which has a torque coupling already preset, or it can be fine-tuned as needed. This insert is clamped in the tap - see related products. Cannot be used alone.
92,83 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!