Narex

Plug-in machine tap Material: HSS Clamping pen

Bar punch, leather punch, seals, rubbers, etc. Diameter: according to the selected variant Other dimensions - see attached catalog sheets Smooth handle Material - type 8480 (up to 15mm): tool carbon steel Material - type 8481 (from 16mm): Cr-V

Threaded dies with jaws / threaded jaws Metric thread Material: HSS - High speed steel Standard: ČSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210) Final sale eyelets from excess stock - made in 19xx, unused

Fixed lathe tip with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243311 / ČSN 24 3311 / DIN806 / DIN 806 Fixed tips are Czech-made, unused, come from excess stock. Only a limited selection.

Spannspitze fest abgeflacht mit 60° Spitzenwinkel und gesinterter Hartmetalleinlage Morsekegelgröße: je nach gewählter Variante Andere Abmessungen - siehe Etiketten für einzelne Varianten Die gesamte Spitze ist auf eine Härte von HRC 58 bis 62 gehärtet. Norm: ČSN 243317 / ČSN 24 3317 / DIN807 / DIN 807 Feste Spitzen sind tschechische Produktion, unbenutzt, stammen aus Überbeständen. Nur eine begrenzte Auswahl.

Articulated head for quick replacement of drills, drills and reamers Used for quick clamping of tools with a Morse taper through a fixed or loose sleeve Standard: ČSN 24 1332 The following bushings are clamped in this chuck: Fixed bushes: ČSN 241333 (for drills) Loose bushes: ČSN 241334 (for reamers, drills)

Fixed fixed sleeve for quick-release articulated head 241332 Insert size: according to the selected variant Inner cone: according to the selected variant Standard: ČSN 24 1333 Application: It is used for quick clamping of tools / drills / with a Morse taper.

Výměnné pouzdro volné per rychloupínací kloubovou hlavu 241332 Velikost vložky : podle zvolené varianty Vnitřní kužel : podle zvolené varianty Norma : ČSN 24 1334 Použití : Slouží pro rychlé upnutí nástrojů / výhrubníků a výstružníků / s morse kuželem. Volná vložka slouží k automatickému ustředění upnutého nástroje na střed otvoru obrobku.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Scope: according to the selected variant Dimensions: see product description for individual variants or see attached catalog sheet Standard: ČSN 221424 Hand adjustable reamers are ONLY suitable for through holes. The blades are reamed gradually (conical hole), i.e. the set diameter will only be reamed when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Left - socket semi-coarse tooth milling cutter for horizontal milling machine Diameter: according to the selected variant Height: according to the selected variant Clamping diameter: according to the selected variant Other dimensions and fastening style - see product description for individual variants Helix angle: 35° Material: HSS - cast ground cutter Standard: ČSN 222155 Usage : Structural and cast steels up to 800 MPa

Machine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips

Diameter: 80mm Height: 40mm Number of bits / teeth: 10 Clamping diameter: 32mm (up) Material: HSS - cast grinding cutter Application: Structural and cast steel up to 800 MPa